KEOL-UV 246
2Pages

TECHNICAL SHEET • SOFT AND IMPACT RESISTANT • HIGH TEMPERATURE HOLD • WITHOUT SOLVENT KEOL-UV 246 KEOL-UV 246 is a light curing, high strength anaerobic adhesive. Suitable for small technical bonding and filling applications, if cured with suitable lamps. CHEMICAL BASIS KEOL-UV 246 is designed to bond, seal or varnish metal and bond glass in industrial applications. Polymerization can be aided by heat, or the use of an activator and / or UV light (wavelength range 320450nm). Clear yellowish Chemical basis Modified urethane acrylate Clear yellowish Viscosity @ 23 ° C Brookfield mPas Hardening time to initial strength [min] at room temperature (approx. 23 ° C), anaerobic on zinc phosphated screws Minimum irradiation time (s) UVA intensity: 60 mW / cm2 The duration of the conversation From 0 ° C to + 10 ° C in the original unopened container Shelf life in unopened container Up to 600ml at room temperature (0 -25 ° C)

TECHNICAL SHEET SURFACE PREPARATION Surfaces to be bonded must be dry and free from dust, grease and other contamination. STORAGE OF THE PRODUCT The shelf life of KEOL-UV 246 is 6 months between 0 and 10 ° C. For best results, store in original, tightly closed containers. PACKAGING KEOL-UV 246 is packaged in bottles of 50ml, 250ml, 1000ml NOTE The information, and particularly the recommendations regarding the application and the KEOL products, are given to you in good faith and are based on current knowledge and experience of the products having been properly stored, handled and applied...