1. Catalogs
  2. Kent Stainless
  3. KVCRP Pop Up Drain - Upper Floor

KVCRP Pop Up Drain - Upper Floor

KVCRP Pop Up Drain - Upper Floor

Product catalog summary
Product Overview: The Kent KVCRP Pop Up Drain for Upper Floors is a pneumatic floor gully designed for installation on upper floors. It features a pneumatic connection accessible from outside the drain body, with an air feed stainless pipe supported by a bracket under the floor slab.
Specifications:
  • Round Top Standard for poured floors and Square Top Options available.
  • Bottom Outlet options include a 4” 150lb R/F S/O ANSI Flange and a P Bend Trap.
  • Vinyl Clamp Top Option available.
Activation Methods:
  • Control Room
  • Sprinkler System
  • Wall Mounted Rotary Switch
Pneumatic Valve Options:
  • Single Acting Sprung Out Cylinder: Requires air supply to close; opens when air is exhausted. Used with fire suppression systems.
  • Single Acting Sprung In Cylinder: Requires air supply to open; closes when air is exhausted. Used in clean production areas.
  • Double Acting Cylinder: Requires air supply to both open and close. Used for cleaning/wash down cycles.
Industries: BioPharma, Pharmaceutical, Laboratories
Product Codes and Flow Rates:
  • KVCRP400/4”RD (U): Height 19.4in, Top Diameter 15.7in, Body Diameter 13.0in, Outlet 4” Sch 10, Flow Rate 126.8 GPM (8 l/s)
  • KVCRP400/6”RD (U): Height 19.4in, Top Diameter 15.7in, Body Diameter 13.0in, Outlet 6” Sch 10, Flow Rate 317 GPM (20 l/s)
Additional Features:
  • Opening Options: Sprung Out, Sprung In, Double Action
  • 1.57” (40mm) clear opening under cover
  • Air Connection Activation
  • Holding Flange, Puddle Flange, DPM Clamp Flange
  • Bottom Outlet options: Threaded (optional), Push Fit (standard)
See more

Catalog excerpts

KVCRP Pop Up Drain - Upper Floor-1

2 Kent KVCRP Pop Up Drain - Upper Floor Kent KVCRP Pop Up Drain - Upper Floor Kent Kent KVCRP Pop Up Drain - Upper Floor This is the Upper floor version of our KVCRP Pneumatic Floor Gully. The pneumatic connection is accessed from outside the drain body. An air feed stainless pipe, by others, then hangs from a bracket connected to the underside of the upper floor slab. There are 3 options for the pneumatic valve choice: Single Acting Sprung Out Cylinder Air supply required to close the drain and exhausted to allow the cover to open using an internal spring. This system is generally used when the drains are connected to the fire suppression system. In the event of the air supply system failing the covers will open. Single Acting Sprung In Cylinder Air supply required to open the drain and exhausted to allow the cover to close using an internal spring. This system is generally used in clean production areas. In the event of the air supply system failing the covers will remain sealed. Double Acting Cylinder Air supply is required to both open and close the drain, this system is generally used when drains are to be opened for cleaning / wash down cycles. Constant air supply required to keep the cover sealed. INDUSTRIES - BioPharma - Pharmaceutical - Laboratories Product Code

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.