Kent KVCR Deep Sump Floor Drain Kent KVCR Deep Sump Floor Drain KVCR Deep Sump Floor Drain The KVCR265/4”RD Deep Sump Floor Drain is a Round Top, Round Body/Bottom Outlet Drain for Heavy Duty Areas with High Flow Rates—typically 97 gallons per minute or 6 litres per second. This is a sealed cleanroom drain with a strong positive seal created by machining away a 0.4” (10mm) groove from a 0.6” (15mm) top plate. A 0.4” (10mm) top plate with a recessed ‘o-ring’ creates the seal. This top plate is then removable with a heavy duty suction cup available as an accessory. They are designed for use primarily in Pharmaceutical factories. They can be used in both light duty and very heavy duty trafficked areas (sealed gullies are most often used in laboratories or cleanrooms which are limited to pedestrian traffic - however the 0.4” (10mm) top plate makes it possible to drive heavy factory traffic over these gullies). As standard the KVCR265/4”RD takes a 0.4” (10mm) thick sealed grating but 0.4” (10mm) slotted and perforated gratings can also be used. In most cases a 4” or 6”SCH10 outlet is required because these are most popular with American Multinational Pharmaceutical companies who have scheduled stainless steel pipework to connect to, but this can easily be substituted for a 110mm or 160mm. Top Connections Sealed Cover with Central Tundish - Pharmaceutical - Laboratories Sealed as standard remove with suction cup Slotted Cover interchange with sealed when use of room changes in future Puddle Flange Tops Square Top Options Tops Vinyl Clamp Top Option Fixed Height as standard Funnel Side Inlet Top Connections Slotted Covers with offset Tundish Secured LockDown Sealed Cover - when occasional back pressure can be expected Tops Round Top Standard for Poured Floors Holding Flange Top Connections Sealed Cover with 4 Staggered Ferrule Connections 2 Part Adjustable Height version available Side Inlets can be positioned at any angle Male - threaded outside Female - threaded inside Bottom Outlet Push Fit (standard) Bottom Outlet Threaded (optional) KVCR Bottom Outlet Product Code Body Diameter KHCR Side Outlet Side Outlet Bottom Outlet 4” 150lb R/F S/O ANSI Flange Bottom Outlet With P Bend Trap Side Outlet With Running Trap