www.kentusa.com www.kentusa.com Precision Radial Arm Drills

www.kentusa.com www.kentusa.com TPR-720A-1100 / 1230 / 1230H • Adopts mechanic switch with forward / reverse functions and longer service life with low damage. • The arm is made of high-class cast-iron. Arm slide is under stick heat-treatment and grinding. • 2HP motor can provide diverse speed selection under heavy-duty cutting. • The main spindle is balanced by special spring. And is more durable than all traditional balance mechanism. • The overload protective devices can secure the operator against injury. • Extra auxiliary dial for spindle feed dept indication. With this indicator, we can...

www.kentusa.com www.kentusa.com TPR-C2500 • The Radial Drill Arm adopts IC timer with advantage of one bottom press, it can automatically release up and vertical down, stop, and automatically clamping easy to operate. The spindle can still maintain in original set after the tool change. • Exclusively for gears type cycling oil pump is furnished to cool off precise gears inside gear box, and minimize excessive wear on gears to lowest extent. • Friction type disc clutch is adopted to absorb impact force caused by vertical movement of spindle, and effectively protect all transmission until inside...

Diameter of column Distance from column surface to spindle center, Max Distance from column surface to spindle center, Min Travel of spindle head Distance from base surface to spindle end, Max Distance from base surface to spindle end, Min Effective area of box table Taper hole spindle Stroke of spindle RPM of spindle Main motor Elevating motor Machine height from floor (Max) Base + column height Shipping weight (approx) kgs Shipping dimensions (LxWxH) Drilling Capacity Tapping Cast iron Cast iron MODEL Diameter of column Distance from column surface to spindle center, Max Distance from column...

www.kentusa.com (1) P/B Switch for Spindle Start (2) P/B Switch for Spindle Stop (3) P/B Switch for Arm Lifting (4) P/B Switch for Arm Lowering (5) Selector for Step Clamping (6) Emergency Stop (7) P/B Switch for Clamping (8) P/B Switch for Unclamping (9) Lever for Spindle Hydraulically Forward / Reverse Turn (10) Control Lever for Clutch (11) Handwheel for Fine Feed (12) Knob for Spindle Speed Selection (13) Knob for Feed Rate Selection (14) Horn for Auto and Manual Feed (15) Handwheel for Hand Horizontal Movement (16) Regulator for Feed Depth Selection and Fine Adjustment (17) Dial for Feed...

Kent Industrial USA, Inc. 1231 Edinger Ave., Tustin, CA 92780 Tel: (714) 258-8526 | Fax: (714) 258-8530 Toll-free: 1-800-KENT-USA (1-800-536-8372) E-mail: [email protected]