Electrical Discharge Machines KEB Series

Product catalog summary

Overview: The KEB Series Electrical Discharge Machines (EDM) are designed for user-friendly operation and efficient machining. They feature a PC-based 32-bit industrial computer with a color LCD, supporting both Chinese/English and Inch/Metric modes.

Key Features:

Editable EDM parameters during machining with FUZZY control for optimized efficiency.
Advanced spark circuit design using MOS-FET transistors and high-speed POWER SINK.
Reduced electrode wear and increased working speed.
FPGA IC components for faster spark and ARC detection.
Two groups of coordinates for base point setting and absolute/relative depth settings.
Single screen displacement monitoring and 200 lines of working progress display.
Automatic transition from rough cut to fine finish.
Standard Z-lock function and optional orbiter usage.

Safety Features:

Auto power shut-off for low oil levels and fire detection.
Auto-depth function for machine retraction and shut-off at preset depths.
Automatic shutdown in case of short circuit.
Fire detection with automatic extinguisher and machine shutdown.

Special Features: Optional "Super Sparking" for machining tungsten carbide or hardened steel over HRC 50, offering faster machining and lower electrode wear.

Machine Structure:

Frames made of FC30, heat-treated for rigidity and stress-relieved for accuracy.
Hardened and precision-ground work table.
Ball screws on X and Y axes for specific models.
V and flat design for maximum accuracy.
TURCITE-B coating on X and Y axes for smooth motion.
Linear guideway and high accuracy screw on Z axis with PWM servo system.
Convenient filter replacement and remote control for ease of operation.

Models: Includes KEB-304B, KEB-860N, KEB-1270N, KEB-707B, KEB-606N, KEB-1060N, KEB-1470N, KEB-808B, KEB-1675N, KEB-2010N, KEB-1880N, KEB-2210N-2H, KEB-3010N-2H, KEB-2210N.

Accessories:

Standard: Work head, tool box, work lamp, up/down door, automatic fire extinguisher.
Optional: CNC oblique loran, permanent magnetic chuck, 3R clamping tool.

Contact Information: Kent Industrial USA Inc., 1231 Edinger Avenue, Tustin, CA 92780 USA. Tel: (714) 258-8526, Fax: (714) 258-8530, Email: [email protected], Website: www.kentusa.com.

Catalog excerpts

Electrical Discharge Machines KEB Series-1

Electrical Discharge Product Catalog

Open the catalog to page 1

Electrical Discharge Machines KEB Series-2

KEB Series EDM Safety Features 1. Auto power shut-off when the oil level goes below the preset fluid level. 2. Auto power shut-off when fire is detected. 3. The auto-depth function can be set to retract and shut off the machine when the preset depth is reached. 4. In case of short circuit, the machine will automatically shut down to prevent damage or fire. 5. Fire detection provides additional protection with automatic fire extinguisher and automatic machine shutdown. Special Type KEB Optional “Super Sparking” feature available for machining tungsten carbide or hardened steel over HRC 50. Features...

Open the catalog to page 2

Electrical Discharge Machines KEB Series-5

2. Permanent magnetic chuck

Open the catalog to page 5

Electrical Discharge Machines KEB Series-6

Delivering Quality, Value, & Service Since 1979 Kent Industrial USA Inc. 1231 Edinger Avenue Tustin, CA 92780 USA Tel: (714) 258-8526 Fax: (714) 258-8530 E-mail Inquiry: [email protected] Website: www.kentusa.com

Open the catalog to page 6

All Kent Industrial catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list