Application Bulletin ... over 200,000 supplied to major oil-and-gas companies with NO catastrophic failures! Increased Bearing Life Our exclusive cladding sustains tight tolerances and remains durable, even under extreme heat and stress. Kennametal Conforma Clad bearings last over ten times longer than those protected by competitive materials. KA KENNAMETAL CONFORMA CLAD conformaclad.com Reduced Operational Costs Unprotected bearings must be replaced every 20 hours to 60 hours. Kennametal Conforma Clad bearings have a run life of over 300 hours, significantly improving feet-drilled-per-day and lowering the average cost-per-foot-drilled. Improved Motor Performance Operators can push motors without damaging the bearings, enabling sharper turns, faster penetration, and less drilling time. Enhanced Drilling Accuracy Reduced bearing wear means design tolerances are maintained downhole, resulting in improved mud motor control and greater drilling accuracy. Unsurpassed Quality Standards Kennametal Conforma Clad radial bearings are designed and manufactured according to stringent quality standards that govern material selection, machining, infiltration brazing, surface finishing, and packaging.

Proven Results Kennametal Conforma Clad™ Technology Kennametal Conforma Clad has been perfecting wear protection for directional drilling components since 1985. Major oil drilling and exploration companies worldwide trust Kennametal Conforma Clad to preserve their high-performance drilling components. Our proprietary cladding technology is the best wear protection available for downhole and surface equipment, including mud motor bearings, flow restrictors, and flow diverters. Kennametal Conforma Clad bearings last longer so contractors can push mud motors harder and get the job done faster. Our radial...