Application Bulletin Kennametal Cladding Solutions: Conveyance Equipment Shaft Sleeves Kennametal offers a wide range of O.D. clad shaft sleeves to fit an assortment of pump sizes and configurations. This tungsten carbide wear protection can be applied to a variety of industrial components that are affected by abrasion, corrosion, and thermal shock. • Extends sleeve life 3-5x longer resulting in fewer equipment shutdowns and component changes. • Extremely resistant to abrasive, corrosive, and erosive wear. • Decreased wear means less leakage flow on shaft seal sleeves and fewer packing adjustments. KA KENNAMETAL CONFORMA CLAD

Reactor Tubes and Fan Liners Reactor Tubing • Extends tube life 4–5x times longer. • Fully protects pendants, u-bends, and complex shapes. • High coefficient of heat transfer and ability to withstand severe thermal shock. • Linear wear offers predictable life extrapolation. • Random 22 ft. lengths available. Proven Results A major chemical company’s reactor tubes were facing extreme abrasion and providing only a 12–18 month lifespan. They decided to install Kennametal prototypes and at the end of a six-month trial, the reactor tubes had only a 10% reduction in cladding thickness, indicating that...

Pump Components • Extends pump component life up to 5x longer. • Ability to clad components up to 64" in diameter and up to 6000 lbs. • Casings, suction liners, impellers. • Capable of cladding a variety of substrates such as carbon steels, stainless steels, and white iron. • Clad surface finish of 125-250 RMS. Piping & Components • Eliminate/reduce blowouts. • Prevent lost product. • Reduce maintenance costs and downtime. • Avoid cross-contamination. • Lengthen run-time between scheduled outages 10-15x longer than unprotected components. • Reduce component weight. • Replaceable wear plates for...

Rotary Airlocks • Retrofit and refurbishment services available. • Rotary airlocks protected with our ceramic solutions last 5-10x times longer than standard airlocks. • Retrofit or rebuild any size airlock. • Machining and grinding capabilities allow modification of existing parts to accept any specified coating or lining, which can then be ground to meet exact tolerances. Screw Conveyors • Extends the life of your screw conveyor up to 6x longer. • Refurbishment of screws up to 35+ ft. • Reduce downtime and maintenance costs. Proven Results A 35 ft long and 18 inch diameter screw conveyor was...