KENDRION SOLUTIONS Servo Line Fail-safe spring-applied brake with high variability

Our brakes - perfect for your safe application KENDRION Industrial Brakes - this stands for excellent service and smart innovation, which we consistently use for the benefit of our customers: Strong know-how Our specialists develop pioneering permanent magnet and springapplied brakes. On the one hand, they use the bundled knowhow in the team; on the other hand, they maintain a dialogue with customers in order to always keep trends and requirements in mind. With INTORQ as a new addition to KENDRION, we have once again consistently expanded our range of spring-applied brakes and clutches for you....

- Fail-safe spring-applied brake - Holding brake with emergency stop function - A total of 8 sizes available - Torque range from 0.22 Nm to 16 Nm - Standard temperature range from -15°C to +120°C Medical Technology Automated Guided Vehicles (FTS/AGV)

Servo Line The Servo Line series of spring-applied brakes has been developed for integration into servomotors. The spring-applied brakes are designed for use as holding brakes with emergency stop function. They are suitable for use in a wide range of industrial applications such as automation & robotics, machine tool engineering, packaging & materials handling, storage systems, assembly lines or renewable energies. The spring-applied single-disc brakes in the Servo Line series are designed to operate dry. They can be mounted to the A-face or B-face end shield inside the servomotor. The braking...

Ideal for integration into servomotors – – – – Technical highlights Designed for integration into motors Possible A-side and B-side mounting to fixed and floating bearing Simple and versatile installation options Variable shaft-hub connection – High power density due to patented air gap adjustment – Guaranteed minimum torque over entire life time – Fast opening and closing times – Noise-reduced switching

Brake types The two standard brake types – 100 and 101 – have been specially developed for integration into servomotors. The innovative design of the Servo Line brakes provides high power density and versatile installation options. Customers are welcome to discuss their specific requirements with us to receive customized solutions. Brake type 100 Long hub – Brake can be guided over the hub only on the flange side – Mounting of the brake on the motor bearing shield is possible on the flange and front side. – Hub protrudes from brake flange (longer overall length) Mounting options Front side Flange...

The hub is the connecting element between the motor shaft and the brake. The hubs of the Servo Line offer various options in terms of hub length, hub diameter, keyway and noise reduction design. The hub type can be selected based on the specific installation conditions. - Special version with set screws available on request - With keyway - Special version with set screws available on request Also available with innovative noise reduction function. Get in touch with us. - With keyway Also available with innovative noise reduction function. Get in touch with us.

Product code / Types Operation mode Standard nominal voltage Protection class Thermal class Transmittable torque range Duty cycle Nominal backlash Ambient temperature Note Holding brake with emergency stop function (other ratings available on request) IP00 The general information on specification sheets and the relevant operating instructions must be observed. Subject to change without notice. 1) Minimum guaranteed static torque over lifetime (factory grinded-in and torque tested brakes) 2) Identification of the transmittable (static) torque level 3) Without emergency stop 4) Measured with parallel...

2) Press-fit connection on request Brake type 100 Brake type 101 Not found the right brake?Talk to us! 9

Order code Our order code helps you specify the desired brake variant. The code is composed of the mounting type, hub type, brake size and brake version. Brake size Flange-side and front-side mounting (standard for sizes 03 to 16) Front-side mounting only (standard for size 02, others available on request) Flange-side mounting only (available on request) Standard series Customized version on request KS 1 0 1 0 3 A 0 0 Servo Line with flange-side and front-side mounting, short hub, size 03, standard series

Customized solutions – tailored exactly to your needs Automation solutions have become an indispensable part of industry and everyday life. In this context, it is often the brakes that ensure safety: They hold loads and brake reliably in an emergency. Just as automation continues to evolve, brakes must also face higher demands – forward-looking products are in demand. At the same time, quality and safety must be unconditionally guaranteed. This is a challenge that Kendrion Industrial Brakes meets with passion and care. When it comes to developing customer-specific solutions, we have three aces...

Kendrion (Villingen) GmbH Wilhelm-Binder-Strasse 4-6 78048 Villingen-Schwenningen Germany T +49 7721 877-1417 [email protected] www.kendrion.com © KENDRION 12.11.2025