video corpo

32 77101A0x Product Specification
2Pages

{{requestButtons}}

Catalog excerpts

32 77101A0x Product Specification - 1

32 77101A0x Product Specification ESM energy-saving module with electronic fast turn-off through voltage detection The energy-saving module consists of a time-controlled rectifier with integral electronic fast turn-off. During start-up, the ESM delivers bridge-rectified output voltage for a limited period of time before changing over to half-wave rectification. The built-in voltage sensor ensures that the DC side output voltage is turned off electronically when AC input voltage is removed. High turn-off voltage generated by inductive loads is limited to the permitted levels inside the module. Thanks to its extremely compact design, the ESM energy-saving module can be installed in very restricted space. The ESM features a central bore for screw fixing inside the junction box. Energy saving principle CE EMC Directive 2004/108/EC: Compliance with the following standards is confirmed: EN 50081-2 (Emission): EN 55011 (VDE 0875, part 11, 1992) Group 1, Class A conducted interference Group 1, Class B radiated interference EN 61000-6-2 (Immunity): EN 61000-4-3 (1997) severity level 3 EN 61000-4-4 (1996) severity level 3 EN 61000-4-5 (1996) severity level 3 Protection: IP 00 to EN 60529 Low Voltage Directive 2006/95/EC: Compliance with the following standards is confirmed: HD 625.1 S1:1996 (VDE 0110) insulation coordination EN 60529 (1991) IP 54 external mounting Machinery Directive 2006/42/EC: These products are considered components in the sense of Machinery Directive 2006/42/EC and must not be put into service until the machinery in which they are incorporated has been declared in conformity with the provisions of the EC Directives. RoHS The specified products comply with the requirements of RoHS Directive 2011/65/EU. Page 1 of 2 © KENDRION 31 January 2014

Open the catalog to page 1
32 77101A0x Product Specification - 2

32 77101A0x Product SpecificationConnection example: operation with brake motors /;L2 BA1 r -o-l— I I BA2 | Prescribed wire diameters for circuit board terminal Specifications subject to change without notice! Connection and operation Energy-saving modules with internal DC side e ideal for use with electromagnetic brakes of electric motors or with other electromagnetic devices with high dynamic performance. They also enable the reduction of losses during holding periods. The technical specifications depend on the connected loads and on their electric and mechanical properties. If the ESM is...

Open the catalog to page 2

All Kendrion (Villingen) GmbH catalogs and technical brochures