Pneumatically Actuated Valves Type 72
2Pages

{{requestButtons}}

Catalog excerpts

Pneumatically Actuated Valves Type 72 - 1

Pneumatisch betätigte Ventile Typ 72 NW 2 Pneumatically Actuated Valves Type 72 2 mm Orifice Das Mini-Tastventil wurde speziell als kleines Signalglied für räumlich begrenzten Einbau entwickelt. Hierbei wurde besonderer Wert gelegt auf: • große Nennweite • kleinste Abmessungen The micro air valve was developed specially as a small signal element for mounting in confined spaces. Particular value has been attached to: • large nominal width • smallest dimensions Somit steht ein pneumatisches Signalglied zur Verfügung, das bei großer Leistung den Abmessungen eines handelsüblichen elektrischen Mikroschalters entspricht. Dichtung: Einbaulage: Druckmittelanschluss: O-Ring: Perbunan Membrane: Perbunan beliebig Technische Daten: Druckbereich: 1,5 - 8 bar Nennweite: 2 mm Funktion: 3/2-Wege (Sitzventil, nicht überschneidungsfrei, vorgesteuert) Umgebungstemperatur: - 10 °C ... + 60 °C* Werkstoffe: Gehäuse: Polyamid Stößel: Al Spreizhülse mit Greifkrallen: Messing A pneumatic signal element with a high performance is thus available which matches a standard commercially available electrical microswitch for size. integrierte Steckarmatur für Schlauch PE 4 x 1 oder PA 4 x 0,65 ca. 0,7 l/min (0 °C, 1013 mbar) Abhängig vom Volumen der Schlauchleitung Operating medium: * 5 micron filtered, lubricated or non-lubricated compressed air; also suitable for other media conforming to ISO-VG 10. Medium: * Gefilterte (5 µm), geölte oder gefilterte nicht geölte Druckluft oder andere gasförmige Medien mit zulässiger Viskosität nach ISO-VG 10. * Siehe Technische Informationen Kuhnke Pneumatikkatalog Technical Data: Pressure range: 1.5 - 8 bar Norminal orifice: 2 mm Function: 3/2-way (poppet valve, open centre between actuations, servo controlled) Ambient temperature range: - 10 °C to + 60 °C* Materials: housing: Polyamide plunger: aluminium serration sleeve with claws: brass Seals: O-ring: Perbunan diaphragm: Perbunan Mounting: any position Pressure connection: integrated instant push-in fitting for tube PE 4 x 1 or PA 4 x 0.65 Air consumption at 6 bar: approx. 0.7 l/min (0 °C, 1013 mbar) Operate time at 6 bar: depends on volume of tubing Kuhnke Pneumatics Catalogue

Open the catalog to page 1
Pneumatically Actuated Valves Type 72 - 2

Pneumatisch betatigte Ventile Typ 72 Pneumatically Actuated Valves Type 72 Nullstellung geschlossen Betdtigung: uber Duse mit Ruckstellung: Feder Normally Closed Actuation: via nozzle with tubing Betatigungszeit abhangig vom Volumen Erforderliches Zubehor: 1 Schlauchtulle, 1 Duse, 1 Schlauch 4 x Actuation time depends on volume Necessary Accessories: 1 tube nipple, 1 nozzle, 1 hose 4 x 1 x Kuhnke Pneumatikkatalog Kuhnke Pneumatics Catalogue

Open the catalog to page 2

All Kendrion Kuhnke Automation GmbH catalogs and technical brochures