Kuhnke AirBox K
4Pages

{{requestButtons}}

Catalog excerpts

Kuhnke AirBox K - 1

Technical information AirBox K is a pneumatic module of the AS-Interface family. ■ 4 digital inputs (M12 screw connectors) for sensor inputs ■ 2 integrated change-over 4/2 way valves ■ Possible valve functions 3/2, 4/2, 5/2, 5/3 way valve (no or nc) ■ Monostable or electrically bistable C©U!5

Open the catalog to page 1
Kuhnke AirBox K - 2

The pneumatic module AirBox K has 4 inputs and 4 pneumatic outputs. You can connect the input terminals directly to sensors (PNP, via M12 plug) with 2- and 3-wire lines. The sensors are supplied with power from the pneumatic module. The integrated pneumatic outputs take the form of two pre-controlled 4/2 way valves (0.1 bar vacuum to 8 bar; 550 Nl/ min) with a common compressed-air supply and separate air outlets. These outlets can be operated by hand by means of separate overrides. Two double-acting cylinders, for example, can be connected to a module of this series. Standard 8 mm tube...

Open the catalog to page 2
Kuhnke AirBox K - 3

Note the following: • To attain degree of protection IP 65/ IP 67, insert blanking plugs in the M12 sockets not in use. • In the event of a short-circuit or overloading of the sensor supply (Pin 1 and Pin 3 of the input) the pneumatic module stops communicating with the master. • If the auxiliary power is turned off via the black line, the valve stays in its last position (electrically bistable) or reset to basic position (monostable). Manual overrides operate only in the basic position of the valve (output bit "O 1" for valve 1 and output bit "O 3" for valve 2). • Operation of the output...

Open the catalog to page 3
Kuhnke AirBox K - 4

AS-i certificate number Electrical data UAS-i (yellow cable) Inputs Sensor power supply AUX POWER (black cable) Outputs Compressed air Auxiliary air supply* Mechanical data Temperature range ZU no. I/O code / ID code (hex) Operational voltage Total current input I Own current requirements Polarity reversal protection For signal "0", Ijn For signal "1", Uin / Iin Voltage range Uout Current carrying capacity Iout (with AUX POWER) Iout Rated operational voltage Ue Operation voltage range Ub Current strength Ipuise, Ihold Polarity reversal protection Power supply unit Pneumatic outputs Max....

Open the catalog to page 4

All Kendrion Kuhnke Automation GmbH catalogs and technical brochures