Industrial Line
28Pages

Industrial Line Electro holding magnets for industrial applications INDUSTRIAL MAGNETIC SYSTEMS BINDER

Kendrion - Industrial Magnetic Systems Kendrion develops, manufactures and markets high-quality electromagnetic and mechatronic systems and components for industrial and automotive applications. For over a century we have been engineering precision parts for the world’s leading innovators in passenger cars, commercial vehicles and industrial applications. As a leading technology pioneer, Kendrion invents, designs and manufactures complex components and customised systems as well as local solutions on demand. Committed to the engineering challenges of tomorrow, taking responsibility for how...

Industrial Line - Direct Current Hoding Solenoids The DC holding solenoids of the Industrial Line are divided into two different designs and variants. They are available in round or rectangular design resp. in the systems “electromagnetic holding solenoids” and “permanent magnetic holding solenoids”. Electromagnetic Holding Solenoids Electromagnetic holding solenoids are pot magnets and consist of a magnet housing and a DC-excited coil. In switched-on state the open magnetic circuit allows to hold resp. span ferromagnetic workpieces. When the voltage is switched off the workpiece to be held...

Industrial Magnetic Systems Product portfolio Features Electromagnetic Holding Solenoids Series GTB This series includes a complete product range of round solenoids. These solenoid systems are preferably used in fixture construction and in the industrial areas automation, transportation and handling. Page 6 - 9 Electromagnetic Holding Solenoids Series GTH Compared to the series GTB these solenoids offer a higher holding force with similar dimensions. This is achieved by a larger dimensioning of the central pole. These solenoid systems are preferably used in machine and tool manufacture,...

Electromagnetic Holding Solenoids Series 10 310 Features Size: Length 100 - 600 mm Width 32 - 60 mm The electromagnetic holding bars are DC holding systems. The magnetic circuit which is open in switched on condition allows to hold ferromagnetic workpieces. These solenoid systems are preferably used in general machine building, for handling and in safety technology for machine building. Permanent Magnetic Holding Solenoid Series 01 310 Features Size: Length 150 mm or 200 mm Width 60 mm These permanent magnetic holding rods are electrically switchable holding solenoids. These systems are...

Electromagnetic Holding Solenoid Series GTB Application This series includes a complete product range of round solenoids. As connections there are free braids resp. cables for GT100B and higher. With sizes GT025B to GT080B a terminal is also possible. The coil is potted with resin (protection class IP65) resp. unpotted (protection class IP54). The complete magnet housing including holding surface is zinced. The mounting is achieved by acentral thread at the rear side of the housing. These solenoid systems are preferably used in fixture constructionand in the industrial areas automation,...

Type GT015B bis GT090B with free braids Type GT100B to GT250B with cable Type GT025B to GT080B with terminal Technical Data Designation Q Special voltage configurations are available on request +49 7575 208 0 or sales-ims@kendrion.com

Holding Force Curves Holding forces FH depending on air gap 5l between holding solenoid and workpiece and on the indicated layer thickness of the counter plate. The values are valid for workpieces of material S235JR with 100% coverage of the holding surface, 90% of nominal voltage and warmed up condition (appr. 70 K excessive temperature without additional heat dissipation). Layer thickness * Material thickness: a = 1 mm b = 2 mm Layer thickness * Material thickness: a = 1 mm b = 3 mm Layer thickness * Material thickness: a = 1 mm b = 2 mm Layer thickness * Material thickness: a = 1 mm b =...

Holding Force Curves Holding forces FH depending on air gap 5l between holding solenoid and workpiece and on the indicated layer thickness of the counter plate. The values are valid for workpieces of material S235JR with 100% coverage of the holding surface, 90% of nominal voltage and warmed up condition (appr. 70 K excessive temperature without additional heat dissipation). Layer thickness * Material thickness: a = 1 mm b = 3 mm Layer thickness * Material thickness: a = 1 mm b = 3 mm Layer thickness * Material thickness: a = 3.5 mm b = 5.5 mm Layer thickness * Material thickness: Layer...

Compared to the series GTB these solenoids offer a higher holding force with similar dimensions. This is achieved by a larger dimensioning of the central pole. The electrical connection is made by free braids. The coil is vacuum potted, the magnet housing is zinced and the holding surface is polished. The mounting is achieved by a central thread at the rear side of the housing. Application These solenoid systems are preferably used in machine and tool manufacture, where air gap adjustments are not required. Please observe, that the complete functioning of the divice is only guaranteed if...

□ Special voltage configurations are available on request +49 7575 208 0 or sales-ims@kendrion.com

Electromagnetic Holding Solenoid Series 10 331 Application This series excels by its extremely flat design and a through-hole for spindle or shaft attachment. The connection is made by free braids on the rear of the housing. The magnet housing is zinced and the coil is vacuum potted. The mounting is achieved by means of one resp. several central bores which are accessible from the pole surface. This series is preferably used in the handling and robotics area, where installation space is narrow, flat and limited by the customer. Lateral force loading equates to a displacement force Fv of...

□ Special voltage configurations are available on request +49 7575 208 0 or sales-ims@kendrion.com

Holding Force Curves Layer thickness ≙ Material thickness: a = 1.5 mm b = 4 mm Layer thickness ≙ Material thickness: a = 1 mm b = 3 mm c = 6 mm Holding forces FH depending on air gap δL between holding solenoid and workpiece and on the indicated layer thickness of the counter plate. The values are valid for workpieces of material S235JR with 100% coverage of the holding surface, 90% of nominal voltage and warmed up condition (appr. 70 K excessive temperature without additional heat dissipation). Layer thickness ≙ Material thickness: a = 2 mm b = 4 mm c = 10 mm