High Performance Line
16Pages

High Performance Line Linear solenoids with high performance INDUSTRIAL MAGNETIC SYSTEMS BINDER

Kendrion - Industrial Magnetic Systems Kendrion develops, manufactures and markets high-quality electromagnetic and mechatronic systems and components for industrial and automotive applications. For over a century we have been engineering precision parts for the world’s leading innovators in passenger cars, commercial vehicles and industrial applications. As a leading technology pioneer, Kendrion invents, designs and manufactures complex components and customised systems as well as local solutions on demand. Committed to the engineering challenges of tomorrow, taking responsibility for how...

Business Stra Innovation Branding Solutior Marketing Analysis Ideas % Success % Manageniwnt Innovation Branding Solution Marketing Analysis Ideas Success Management

II High Performance Line The fast-acting linear solenoids excel by an enormous stroke density and a flexible modular system. These sqare solenoids are used wherever large forces, short switching times and high efficiency with limited installation space are required. They fulfil the special requirements when used in high voltage circuit breakers and railway door lockings as well as in general actuating functions in automation and safety engineering. The mode of operation of the solenoid is based on the force exerted on ferromagnetic bodies in the magnetic field. Electromagnets transform...

Fast-acting linear solenoid Series LHP Thanks to the optimum ratio of iron to copper, the maximum force is achieved in a limited space. The housing consists of two parts, allowing a modular design of different voltage, power and stroke variants. LHP035 Edge dimension 35mm Standard version

Fast-acting linear solenoid LHP035053 The LHP035053 is a linear solenoid in closed design with an edge dimension of 35 mm. The series is preferably used for smallest installation volume and high force requirements. The fast-acting linear solenoid can be operated pulling or pushing; the stroke movement is achieved by electromagnetic force from stroke start position to stroke end position. The retraction is effected by an optionally integrated return spring. The mounting is provided at the front end. The modular design allows to equip the LHP035053 with further options, see options for...

Stroke Force Curves The power indicated is reached at 90% of the rated voltage. The solenoids can be installed in any position, but the force transfer should be in axial direction only. The values for the duty cycles are reference values and apply for rated voltage, warmed-up condition and load with 70% of the magnetic force of the device.

Fast-acting linear solenoid LHP025055 The LHP025055 is a linear solenoid in closed design with an edge dimension of 25 mm. The series is preferably used for smallest installation volume and high force requirements. The fast-acting linear solenoid can be operated pulling or pushing; the stroke movement is achieved by electromagnetic force from stroke start position to stroke end position. The retraction is effected by an optionally integrated return spring. The mounting is provided at the front end. The LHP025055 can be mounted in any position; the force transfer is axial. The standard model...

Stroke Force Curves The power indicated is reached at 90% of the rated voltage. The solenoids can be installed in any position, but the force transfer should be in axial direction only. The values for the duty cycles are reference values and apply for rated voltage, warmed-up condition and load with 70% of the magnetic force of the device.

with / without bridge rectifier depending on the voltage The 2-pole plug-in connector with protective lead is a connection specially designed for electro-magnetic devices. The cable outlet can be rotated 4 x 90° by inserting the contact carrier accordingly. After attaching the plug-in connector to the pin plate of the device plus sealing it is secured with a machine screw supplied. This guarantees an exact seal of the combination and prevents the plug-in connector from being accidentally detached under vibration. A cable gland Pg 11 (material no. 430006) serves to seal the cable. The...

Installation Note With its thread the fork head is screwed to the pull or push bar of the linear solenoid and secured with a locknut. Fork head acc. DIN 71752 Fork heads are used to connect all types of linear solenoids to force transfer elements such levers, push bars, valve flaps and sliding dampers. In many cases they enable rapid connection during assembly and also quick replacement of wear and spare parts. The types without ES-bolt achieve the force transfer between fork head and customer application by a cylindrical pin with common safety elements. The fork heads are...

Technical Explanations Thermal Classes As shown in the table below thermal classes are classified according to DIN VDE 0580 / 07.2000 into insulation classes on the basis of their longterm thermal stability. Depending on the type our linear solenoids are manufactured in thermal classes E, B and F. If required by the application most devices can also be delivered in thermal class H. Rated Modes of Operation Continuous operation is the operation during which the duty cycle is so long that the SteadyState temperature is reached. Intermittent operation is the operation during which duty-cycle...

Technical Explanations Reset force is the force required to reset the armature into stroke start position after switching off the excitation current. Relative duty cycle (% ED) is the ratio between duty cycle and cycle time in per cent. It is calculate according to the following formula: % ED=(duty cycle / cycle time) * 100 In order to calculate the relative duty cycle the preferred value of the cycle time acc. DIN VDE 0580 item 3.2.2 of 5 minutes is usually taken as a basis. If the cycle time is irregular the relative duty cycle is determined from the ratio between the sum of the duty...

Overview of Catalogue Linear Solenoids High Performance Line single-stroke solenoids compact design individual fixing mono- and bistable version square single-stroke solenoids high force with small installation space modular system short pull-in times Electro Holding Magnets door holding magnet great variety Control Power Line round single-stroke solenoids high forces and stroke travels short switching times also reversible solenoids control solenoids extremely fast short strokes precise switching Oscillating Solenoids Industrial Line High Power Line industrial holding magnets vibratory...