HAHN CQLINE
20Pages

HAHN CQLINE Electromagnetic door holding systems

Kendrion - Industrial Magnetic Systems We develop solutions! Kendrion develops, manufactures and markets high-quality electromagnetic systems and components for industrial and automotive applications. For over a century, we have been engineering precision parts for the world’s leading innovators in passenger cars, commercial vehicles and industrial applications. As a leading technology pioneer, Kendrion invents, designs and manufactures complex components and customised systems as well as local solutions on demand. We are committed to the engineering challenges of tomorrow and taking...

D.C Door Retainer Magnets of the HAHN CQLine are primarily used as hold open devices for fire protection exclusions (fire protection swing doors, rolling gates, fire shutters with self locking devices).The fire door is normally held in the open state to allow easy passage and access through busy corridors. Controlled by a fire detection or smoke protection control unit, the door retainer releases the door when the power is cut and the over-door closer quickly closes the fire door automatically to prevent the spread of fire and smoke throughout the building. The door retainer can be mounted...

Industrial Magnetic Systems Product portfolio HAHN CQSAFE Technical Details Market Germany: In terms of approvals concerning building inspection World: For special requirements in terms of quality and installation (protection class, versions, etc.) Vacuum cast coil VdS quality-tested according to EN1155 & EN14637 Optimized design and quality Reverse polarity protection diode and spark supressing diode Diameters of the base magnet Holding force Keeper Plate Choise available HAHN CQSTANDARD Pressed coil Testet according to EN1155 & EN14637 Cost-optimized and -oriented Technical Details...

Kendrion, your expert for Electromagnetic door holding systems Largest product portfolio in the field of electromagnetic door holders More than 50 years R&D experience with many renowned companies Constant further development and compliance of currently valid EU standards thanks to the close cooperation with testing and certification institutes. ■ Worldwide availability through subsidiaries or sales partne

The types of the HAHN CQSAFE line are generally vacuum-potted with casting resin, the basic device having protection class IP65. The magnets are quality-tested according to the respective VdS-numbers and are therefore subject to sample taking by the VdS twice a year. Furthermore, the installation sizes are tested according to EN1155 and EN14637 in compliance with the European regulations. The individual production steps are subject to a monitored, quality-oriented production process. All models (with the partial exception of magnets with feedback) are equipped with two integrated diodes...

Base Magnet on Steel Mounting Plate with Clamp In this series the base manget is mounted on a steel mounting plate. The serial electrical connection is a two-pole terminal clamp on the plate allowing for an easy installation. These types are primarily used in locking devices at sliding gates. Technical Details

This series is suitable for wall-mounting. The use of the plastic PA6 with a 30% portion of fibre glass guarantees high stability. A manual release button is integrated. The electrical connection either from the rear side or through robust cable connections allowing for a later installation. Model GT. .R061 = Closed housing; Connection rear side Model GT. .R062 = 2 cable connections PG9 Technical Details

This series is applicable for floor, ceiling and wall-mounting. The customer can easily turn the anodized aluminium swivel head from wall to floor resp. ceiling mounting. The tube can be shortened to 110 resp. 145 mm so that almost all distances between door and wall can be bridged. Technical Details Plastic Swivel Head This series is applicable for floor, ceiling and wall-mounting. The customer can easily turn the plastic swivel head. Technical Details Dimension Wall Mounting Floor and Voltage Force Mounting Plate Ceiling Mounting

Distance Tube, Wall Mounting This series is designed exclusively for wall mounting. Due to the wide product range distances form 65 mm to 450 mm can be realized. With magnet diameters of 63 and 70 mm also suitable for heavy doors! Technical Details

D.C Door Retainer Magnets Series HAHN CQSTANDARD The types of the HAHN CQSTANDARD Line describe a cost-optimized and oriented program designed specifically for the European market and its requirements. The magnets are tested according to EN1155 and EN14637. Through frequent self-monitoring and the annual inspection by the Vds, we guarantee highest quality. Base Product Features ■ Version with terminal clamp and mounting plate ■ Integrated reverse polarity protection diode and spark supressing diode ■ Tested according to EN1155 / EN14637; Magnet IP54; Connection IP42 Technical Details

This series is applicable for universal applications. The manual release button can be placed to the base (see picture) or to the left or right side. Cables are guided from the rear or through enclosed exits from the base side, left or right. With brackets (accessories) optional floor or wall mounting. You can find suitable accessory on page 14. Product Features ■ With manual release button ■ Integrated reverse polarity protection diode and spark supressing diode Tested according to EN1155 / EN14637; Magnet IP54; Connection IP42 Technical Details

D.C Door Retainer Magnets Accessories Series HAHN CQSTANDARD Floor mounted bracket GTR048000A12006 This base is particularly suitable for models GTR048000A07, A08, A09, A13, A14 as well as for GTR063000A07 for floor mounting (Page 13). The magnet can either be mounted within the side plates (protection against vandalism) resp. in opposition (standard). Due to the thickness of the metal this base is also suitable for heavy-duty demands. Wall mounted bracket This bracket is particularly suitable for models GTR048000A07, A08, A09, A13, A14 as well as for GTR063000A07 for floor respectively...