Catalogs >
Kemtron >
Conductive Adhesives

Conductive Adhesives
1 / 3Pages

Catalog excerpts

Conductive Adhesives Product Overview Kembond is a range of electrically conductive adhesives that provide a variety of RFI/EMI shielding and grounding solutions. They consist of a densely loaded adhesive filled with micro sized highly conductive particles. Application • Vibration and/or shock resistant sealant/adhesive for electronic assemblies. • Electrical connection/bonding of materials with dissimilar thermal expansion coefficients i.e. mounting shielded windows EMI shielding with environmental sealing (IP68 possible). • ESD control/grounding. • Structural adhesive – can be used to permanently bond metal assemblies. • Electrical connection of components avoiding the use of mechanical fixings or solder. Storage It is recommended that when not in use that the material is stored in a cool dark, dry place. If kept properly sealed and in a suitable location then the material will remain usable for up to 3 months, depending on type. Handling When using this material observe usual standards of industrial hygiene/practice. Avoid skin/eye contact and work in a well ventilated area. For more detailed information please refer to the MSDS (Material Safety Data Sheet). 19-21 Finch Drive, Springwood Industrial Estate, Braintree, Essex CM7 2SF, United Kingdom. T +44 (0)1376 348115, F +44 (0)1376 345885, E info@kemtron.co.uk, www.kemtron.co.uk

Open the catalog to page 1

Conductive Adhesives Product Overview (Continued) Availability Electrically Conductive Silicone Adhesives RTV • Single component – ready to use. • Room temperature cure. • Neutral cure – does not involve corrosive by-products on curing. • Safe for use with most common substrates – non tarnishing / discolouring. • Excellent resistance to ageing. • Wide service temperature range – remains flexible and conductive at extremes of temperature. • Stable – low bond (joint) resistance through temperature cycling. Kembond RTV can be supplied in either standard manual or pneumatic (air dispense) 10ml...

Open the catalog to page 2

Conductive Adhesives Technical Specification Silver loaded epoxy adhesive Silver Aluminium loaded RTV silicone Kembond SSA-RTV Uncured Properties Uncured properties Colour Silver Semi viscous paste Light Tan Semi flowable paste Cure time 10mm bond width at 23°C / 50% RH Recommended minimum time before stressing bond Recommended minimum time before stressing bond Cured Properties Cured Properties Adhesion – lap shear (aluminium to aluminium) Service temperature range Bond resistance (aluminium to aluminium) Thermal conductivity Recommended bond thickness Adhesion – lap shear (aluminium to...

Open the catalog to page 3