TriClamp
2Pages

Applications: • Interface detection • Concentration measurement • Product differentiation & identification • Control & optimize CIP cycles The Kemtrak backscatter TriClamp process probe is designed to accurately measure low to extremely high turbidity directly in pipelines. The probe uses a standard DN25/1" TriClamp sanitary type process connection making it suitable for direct mounting on any size pipeline greater than DN25/1" diameter. The dual fiber optic design of the immersion probe provides high resolution at low turbidity with excellent linearity all the way up to extremely high turbidity when used with a Kemtrak NBP007 near-infrared backscatter photometer. A unique benefit of the Kemtrak backscatter immersion probe is that it does not go blind at high sample turbidity. Other probes will stop working at 4 000 NTU/FNU (<1 wt% solids) after which the signal will decrease resulting in an erroneous and misleading output. The output of the Kemtrak probe will continue to increase with sample concentration ensuring a reliable measurement. Immersion Bacscatter Probe Comparission Kemtrak NBP007-L Kemtrak NBP007-H - other probe (output x5) manufactured in 316L stainless steel with a robust scratch resistant sapphire window. The highly polished unbroken probe surface ensures freedom from fouling and suitability for sanitary applications. The fiber optic immersion probe has no electronics that will be damaged by high temperature process streams or sterilization cycles and is suitable for hazardous area use. All Kemtrak products are made from the highest quality materials and are designed to the most demanding specifications to ensure long life and the highest reliability. Suspended solids concentration

Compatible with DN 25, DN32, DN40 1" and 1 A" pipe clamp fittings • Standard TriClamp type sanitary fitting (ISO 2852 & DIN 32676) • Sapphire window is mounted from inside of probe and sealed using o-rings (no epoxy) - impossible to fall out in the process • Suitable for installation in hazardous area (Ex proof) Technical Data Backscatter TriClamp Probe Measurement Range 5 FNU/NTU - 100% solids Manifold Sanitary Tri-Clamp® clamp type fitting ISO 2852 & DIN 32676 Compatible with 50,5 +0/-0,19 mm outside diameter (DN25, DN32, DN40, 1" and 1^"). Material Stainless EN 1.4435 /...