Documentation CM and CA
2Pages

{{requestButtons}}

Catalog excerpts

Documentation CM and CA - 1

Electric portable Lifter CM - CA Up to 150 kg The all purpose lifter is 'the' multi purpose device, an essential piece of equipment for any business involved in fitting airconditioning units and all loads Any one of the range will make better use of man power, turning a 3 man lifting job into a 1 man lifting job. This range of portable lifting equipment will give your business the edge over your competition. Better deploy manpower on site, make lifting jobs easier and the overall installation of loads quicker. Constructed by heat treated, robust aluminum, compact, safety and reliability. Depending on the capacity, the portable lifter is with : Telescoping masts for CM 340 and CM 520 - Sliding rails for CA 400 Set-Up without tools, the legs can be release or fold in seconds without tools. 4 Legs, versatile and infinitely adjustment, available use in uneven ground with special design can let you working close to the wall (design UPTER) The variable speed control can be soft start or adjust the micro operating height. Emergency Stop Button. Press the button for stop raising / lowering immediately. Manual operation incase of power failure Automatic Overload breaker: it equipped to prevent to over weight loading. Level to ensure the proper set-up while and adjusting the telescoping legs Platform Special design for install the window type of Air-conditioner. CM 520 and CA 400 are equipped with wheels, option for CM 340 Equiped with handle and transport wheels (CM 520 and CA 400) Can be transported by van or estate car Basic height Lifting height Load capacity Dimensions closed Dimensions operating

Open the catalog to page 1
Documentation CM and CA - 2

Electric portable Lifter CM - CA Features CM with 4 telescoping legs for unneven ground and Operation in confined space. Special design to work close to the wall Manual operation with handle CA 400 with 2 individually adjustable feet for use in front. According to the load 2 counter weight (delivered) are needed. Each leg has a height adjustable wheel brake to fit almost any configuration site. Level To check if the lifter is on the correct position Plateform turns to 360° With screw for multiposition Accessories Motor cover CA 400 included Platform outrigger Lenght 2 x 380 mm Completely...

Open the catalog to page 2

All KeM.Tech catalogs and technical brochures