Catalogs >
KEMPER >
KEMPER EXHAUST ARMS

KEMPER EXHAUST ARMS
1 / 4Pages

Catalog excerpts

Exhaust arms Up to 10 meters range

KEMPER exhaust arms in tube and flexible hosing versions The KEMPER extraction arms are available in lengths up to 10 meters. They are outstandingly suitable for extracting welding fumes, gasses, light dust and solvents. The arms and their booms allow good range and at the same time ensure an ergonomic and tidy workplace. Booms These can be one- or two-part depending on length and fastened in place by a wall bracket. They have C rails with trolleys and can handle loads, for example tools or wire feeders, of up to 50 kg. Extraction arms The arm can be moved to any desired position within its...

Open the catalog to page 2

KEMPER exhaust arms overview Technical Data Rigid metal tube arms Noise level at 1000 m³/h: 64 dB (A); Diameter: 150 mm Part No. Flexible hosing exhaust arms Noise level at 1000 m³/h: 64 dB (A); Diameter: 150 mm Part No. Length in m Joints Weight in kg

Open the catalog to page 3

Accessoiries Lighting set Part No. 79 103 048 Description Lighting kit incl. Exhaust hood, 2 x 5 W LED lights, Trafo-Box (original fitted) Connecting material Complete set to fasten an outgoing air hose, diam. 160 mm, to the air escape side of the ventilator or to the wall bracket of an exhaust arm. Part No. 93 018 Description Satz Verbindungsmaterial Ø 160 mm Connecting pipe Ø 160 mm out of multilayer aluminium foil, extendable from 1,25 m to 5 m max. Part No. 93 200 Description Connecting pipe Ø 160 mm Column This column is the optimal solution, if there is no possibility to fasten the...

Open the catalog to page 4

KEMPER EXHAUST ARMS 1 / 4Pages

Catalog excerpts

All KEMPER catalogs and technical brochures

KEMPER EXHAUST ARMS
1 / 4Pages