1. Catalogs
  2. Kemper Olpe GmbH
  3. pressure reducing valve-filter combination, figure 713 0G

pressure reducing valve-filter combination, figure 713 0G
1 /2Pages

pressure reducing valve-filter combination, figure 713 0G

pressure reducing valve-filter combination, figure 713 0G
1 /2Pages

Catalog excerpts

pressure reducing valve-filter combination, figure 713 0G-1

pressure reducing valve-filter combination, figure 713 0G Product Features • mechanically acting, manual backwash filter • single-seated valve with balanced plug • internal parts made of gunmetal, stainless steel and plastic • with differencial pressure controlled pollution indicator for maintenance • opaque filter housing to prevent algae growth • with manual backwash function for filter cleanup under operation • PRV housing made of transparent plastic • outlet pressure adjustable on lockable knurl with pressure scale • easily maintainable PRV • with stainless steel mesh at inlet • male union thread • exchangable filter cartridge • rotatable drain according to EN 1717 • free from dead spots • for horizontal and vertical installation, drain valve down • adjustable month indicator for next maintenance • incl. manometer for system pressure secondary side • incl. allen key • incl. gunmetal base module • maintenance requirements in accordance with DIN EN 806-5 must be complied with Standards and Approvals • DVGW approval • plastic parts with KTW approval • according to accepted materials list from German environmental agency • up to DN 32 soundproofing certification according to DIN EN ISO 3822 Class 1 • DIN EN 1213 / EN 13443 / EN 1567 Technical data • pressure rating PN 16 • max. operating temperature 30 °C • min. primary pressure 0.2 MPa • min. outlet pressure 0.15 MPa • max. outlet pressure 0.60 MPa • factory setting 0.4 MPa • lower mesh 90 pm • upper mesh 125 pm © Copyright by Gebr. Kemper GmbH + Co

 Open the catalog to page 1
pressure reducing valve-filter combination, figure 713 0G-2

pressure reducing valve-filter combination, figure 713 0G Part no. Accessories • gunmetal solder union connector, figure 476 04 • gunmetal union connector, union nut, FPT, figure 476 06 • gunmetal union connector, union nut, FPT, with drain valve, figure 476 07 • gunmetal union connector, union nut, MPT, figure 476 08 • solder / pressfit union connector, figure 476 14 • pressfit union connector, MAPRESS stainless steel and copper, figure 476 22 • pressfit union connector, SANPRESS and PROFIPRESS, figure 476 30 • pressfit union connector, SANHA and NiroSan, figure 476 35 • pressfit union connector,...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.