- Catalogs
- Kemper Olpe GmbH
- pressure reducing valve, figure 710 0G
pressure reducing valve, figure 710 0G
pressure reducing valve, figure 710 0G
- Single-seated valve with a balanced plug.
- Internal parts made of gunmetal, stainless steel, and plastic.
- Easy maintenance with a transparent plastic PRV housing.
- Adjustable outlet pressure with a lockable knurl and pressure scale.
- Includes stainless steel mesh at the inlet and a male union thread.
- Suitable for any installation position with a plugged port for an optional manometer.
- Comes with an Allen key and gunmetal base module.
- Maintenance requirements must comply with DIN EN 806-5.
- DVGW and WRAS approvals.
- Plastic parts approved with KTW and W 270.
- Soundproofing certification up to DN 32 according to DIN EN ISO 3822 Class 1.
- Complies with DIN EN 1213 / EN 1567.
- ÜA-Reg.-Nr. R-15.2.3-21-17048, WIEN-ZERT.
- Pressure rating: PN 16.
- Maximum operating temperature: 30 °C.
- Minimum outlet pressure: 0.15 MPa.
- Maximum outlet pressure: 0.60 MPa.
- Factory setting: 0.4 MPa.
| Part No. | DN | A1 | A2 | H1 (mm) | H2 (mm) | L1 (mm) | cv (m³/h) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| 7100G01500 | 15 | G 3/4 | G 1/4 | 150 | 25 | 90 | 3.5 | 0.99 |
| 7100G02000 | 20 | G 1 | G 1/4 | 150 | 25 | 90 | 5.9 | 1.01 |
| 7100G02500 | 25 | G 1 1/4 | G 1/4 | 150 | 25 | 100 | 5.9 | 1.07 |
| 7100G03200 | 32 | G 1 1/2 | G 1/4 | 225 | 38 | 105 | 12.25 | 2.34 |
| 7100G04000 | 40 | G 1 3/4 | G 1/4 | 225 | 38 | 130 | 14.3 | 2.64 |
| 7100G05000 | 50 | G 2 3/8 | G 1/4 | 225 | 38 | 140 | 17.25 | 2.91 |
- Various gunmetal and pressfit union connectors.
- Manometers with rear and below connections.
- PRV cartridge, threaded plug, basic module, strainer, and O-ring for basic module.
Catalog excerpts
pressure reducing valve, figure 710 0G Product Features • single-seated valve with balanced plug • internal parts made of gunmetal, stainless steel and plastic • easy to maintain • PRV housing made of transparent plastic • outlet pressure adjustable on lockable knurl with pressure scale • with stainless steel mesh at inlet • male union thread • for any installation position • plugged port for optional manometer • incl. allen key • incl. gunmetal base module • maintenance requirements in accordance with DIN EN 806-5 must be complied with Standards and Approvals • DVGW approval • WRAS approval • plastic parts with KTW and W 270 approval • according to accepted materials list from German environmental agency • up to DN 32 soundproofing certification according to DIN EN ISO 3822 Class 1 • DIN EN 1213 / EN 1567 • UA-Reg.-Nr. R-15.2.3-21-17048, WIEN-ZERT Technical data • pressure rating PN 16 • max. operating temperature 30 °C • min. outlet pressure 0.15 MPa • max. outlet pressure 0.60 MPa • factory setting 0.4 MPa © Copyright by Gebr. Kemper GmbH + Co. KG / Harkort
Open the catalog to page 1
pressure reducing valve, figure 710 0G Accessories • gunmetal solder union connector, figure 476 04 • gunmetal union connector, union nut, FPT, figure 476 06 • gunmetal union connector, union nut, FPT, with drain valve, figure 476 07 • gunmetal union connector, union nut, MPT, figure 476 08 • solder / pressfit union connector, figure 476 14 • pressfit union connector, MAPRESS stainless steel and copper, figure 476 22 • pressfit union connector, SANPRESS and PROFIPRESS, figure 476 30 • pressfit union connector, SANHA and NiroSan, figure 476 35 • pressfit union connector, MEPLA, figure 476 40 •...
Open the catalog to page 2
