CONTROL-PLUS flow and temperature sensor, Hz signal, union thread, figure 138 4G
2Pages

Product Features • frequency output signal • for the accurate measurement of flow rates and temperatures in drinking water systems • wetted metal parts made from dezincification-free and corrosion-resistant gunmetal, resistant against aggressive water • sensor housing for low pressure loss • up to 50% of measuring range: divergence max. 1% of full-scale reading • from 50% of measuring range: deviation max. 2% of measured value • for connection to the KHS control systems • male union thread • free from dead spots • with vortex flow sensor that includes a 2-wire Pt1000 • 5-pin M12x1 interface • readout and display of values via additional available KHS potable measuring instrument • optional cable M12x1 required for connection to KHS control systems • DN 10 is recommended for use with flow limiter 2 l/min Standards and Approvals • WRAS approval • plastic parts with KTW and W 270 approval • according to accepted materials list from German environmental agency • UA-Reg.-Nr. R-15.2.3-21-17048, WIEN-ZERT Technical Data • pressure rating PN 10 • min. flow velocity 0.2 m/s • max. flow velocity 2.5 m/s • min. operating temperature 0 °C • max. operating temperature 100 °C • protection class IP65 • power supply 5 V DC

CONTROL-PLUS flow and temperature sensor, Hz signal, union thread, figure 138 4G accessory CONTROL-PLUS hand-held measuring device for sensors, figure 138 00 002 M12x1 cable with loose litz wires, figure 138 00 012 sensor measuring module, figure 138 00 011 insulation shell for quarter turn stop valves and CONTROL-PLUS sensors, figure 471 19 gunmetal solder union connector, figure 476 04 gunmetal union connector, union nut, FPT, figure 476 06 gunmetal union connector, union nut, FPT, with drain valve, figure 476 07 gunmetal union connector, union nut, MPT, figure 476 08 solder / pressfit...