KEM Automotive Auto Bodies
7Pages

KEM Automotive Auto Bodies Certified according to DIN EN ISO 9001 DESIGN | PRODUCTION | DISTRIBUTION | CALIBRATION

Original KEM Document: KEM_AutoBodies_EN_160331_E003 | Copyright KEM, Subject to change without notice Original KEM Document: KEM_AutoBodies_EN_160331_E003 | Copyright KEM, Subject to change without notice

KEM Automotive – Auto Bodies KEM KÜPPERS IN AUTO BODY CONSTRUCTION KEM Automotive – Auto Bodies KEM KÜPPERS AUTOMOTIVE APPLICATIONS AT A GLANCE In the automotive industry some of the most cost and energy-intensive production processes are the steps around the preparation and com- pletion of the painted bodywork. ● Filling operating supplies Nowadays, the facilities are developed to be more resource and cost- ● Sealing with UBS, NAD, PVC materials for underbody protection and seam sealing efficient. This makes permanent further development with the various ● Steaming with bitumen materials...

KEM Automotive – Auto Bodies KEM Automotive – Auto Bodies KEM KÜPPERS IN BODY SEALING, UNDERBODY PROTECTION AND INSULATING MATS APPLICATION The cleaned and pre-treated car bodies coated with cathodic dip Insulating materials are applied to the body sheets such as the floor pass through automated sealing processes. Here the underbody and assemblies on the front wall, footwell, the gearbox tunnel, rear seat, rocker panel coating are very precisely dosed with partly abrasive boot and roof lining. Insulation is also applied precisely to moving PVC materials under high pressure. The same process...

The continuous monitoring of paint application processes and the optimal dosing of the primers, topcoats or clearcoats play a decisive role in the surface treatment of metal or plastic parts in the automotive industry. Today's production facilities are gauged by their energy efficiency and by the conserving and efficient use of the liquids. The focus in the development of the flowmeter at KEM is on the highly accurate and reliable flow measurement coupled to a very fast response time. This allows for easy handling and control of the systems and their complex processes. KEM is constantly...

KEM KOPPERS IN CAVITY PROTECTION KEM KOPPERS INADHESIVE BONDING IN AUTO BODY CONSTRUCTION In cavity protection precisely predetermined amounts of wax are injected into the cavities of the bodies after the painting process. These small quantities are dosed in very short time intervals and therefore require a very precise and quick-reacting measurement system. KEM is the preferred partner in the automotive industry for the development of dosing systems in cavity protection. These are used in all leading robot systems and wax machine systems The most common joining technology in auto body...

Liebigstraße 5 85757 Karlsfeld Germany Wettzeller Straße 22 93444 Bad Kötzting Germany Liebigstraße 5 85757 Karlsfeld Germany Wettzeller Straße 22 93444 Bad Kötzting Germany More distributors & partners can be found at: www.kem-kueppers.com KEM Küppers Elektromechanik GmbH | Liebigstraße 5 | D-85757 Karlsfeld | Tel +49 8131 59391 - 0 | Fax +49 8131 92604 Original KEM Document: KEM_AutoBodies_EN_160331_E003 | Copyright KEM, Subject to change without n