Series 35 X HTC - 2 Pages

Add to MyDirectIndustry favorites
Series 35 X HTC

Catalog excerpts

+ KELLERHigh Temperature Pressure Transmitter    Serie 35 X HTCfor biotechnology / food-industries This piezoresistive high temperature transmitter is suited for media temperatures up to 300 °C. The pressure, acting onto the flush diaphragm, is transferred over an oil-filled capillary onto the silicon measuring cell. The capillary has the function of a cooling spiral, allowing media temperatures of up to 300 °C. The temperature of the electronics, which can be read out with the PROG30 software, may not exceed 120 °C. For highly aggressive media, KELLER offers pressure ports in different materials. Digital Output of Transmitter These Series are based on the stable, piezoresisitive transducer and a micro-processor electronics with integrated 16 bit A/D converter. Temperature dependencies and non-linearities of the sensor are mathematically compensated. With the READ30 software and the KELLER cable K-107, the calculated pressure can be displayed on a Palmtop, Laptop or PC. The READ30 software also allows the recording of pressure signals and the graphic display on the PC. Up to 128 transmitters can be hooked together to a Bus-system. Transmitter with Analog Output The micro-processor integrates a D/A converter of 16 bit for analog signal outputs of 4...20 mA or 0.10 V. The output rate is 100 Hz (adjustable). The digital output is available on all transmitters with analog output. Programming With the KELLER software READ30 and PROG30, a RS485 converter (i.e. K-102, K-104 or K-107 from KELLER) and a PC, the pressure can be displayed, the units changed, a new gain or zero set. The analog output can be set to any range within the compensated range. C€ KELLER AG fur Druckmesstechnik CH-8404 Winterthur +41 52 235 25 25 E3 info@keller-druck.com KELLER Ges. fur Druckmesstechnik D-79798 Jestetten +49 7745 9214 0 H eurocenter@keller-druck.com Edition 08/2016 Subject to alterations Companies approved to ISO 9001 ■fit www.keller-druck.com

 Open the catalog to page 1

□ KELLER Specifications Standard Pressure Ranges (FS) and Overpressure in Bar PR 35 X HTC    3    10    30 All intermediate ranges for the analog output are realizable with no surcharge by spreading the standard ranges. Option.■ Adjustment directly to intermediate ranges (below20 pieces against surcharge). 1) Linearity + Hysteresis + Repeatability + Temp. Coeff. + Zero + Span Tolerance 2) Media Temperature (temperature of electronics max. 120 °C) Linearity (best straight line) True Output Rate Resolution Long Term Stability typ. Load Resistance (O) Electrical Connection Insulation Storage-...

 Open the catalog to page 2

All KELLER catalogs and technical brochures

  1. KELLER

    36 Pages

  2. Series 26 Y

    2 Pages

  3. Series 26 W

    1 Pages

  4. Handpump K/P

    1 Pages

  5. K-114 BT

    3 Pages

  6. K-114

    3 Pages

  7. 21 ge

    1 Pages

  8. LEO 3

    1 Pages

  9. FA-23

    1 Pages

  10. Series 8

    2 Pages