Piezoresistive OEM Capsule Series 6
1Pages

{{requestButtons}}

Catalog excerpts

Piezoresistive OEM Capsule Series 6 - 1

for sealed gauge and vented gauge pressures The Series 6 capsules are of all welded stainless steel construction, with integral media isolation diaphragm. No ‘O’ring seals are used. The Series 6 uses a silicon TAB sensor mounted in the oil filled stainless steel capsule, providing a highly stable measuring cell with negligible hysteresis, high output signal and a life of millions of pressure cycles. TAB (Tape Automated Bonding) is a flexible printed circuit system for interconnection between the silicon sensor and the capsule output pins, offering improved reliability and significantly lower production costs. Series 6 is a low cost sensor for OEM use, tested for function only, with no calibration data ­ upplied. Series 6T is supplied tested, with calibration certificate: Linearity, sensitivity, zero s point, temperature coefficients 0…50 °C and compensation resistor values (resistors not supplied). Specifications Sealed Gauge (Low Pressure) Overpressure Sealed Gauge (High Pressure) Overpressure Vented Gauge Overpressure Constant Current Supply Signal Output (FS) Bridge Resistance @ 25 °C Offset at 25 °C Accuracy (1) Stability Operating Temperature Temperature Coefficient - Zero - Sensitivity Housing and Diaphragm (1) ± 0,01 %FS/°C typ. ± 0,05 %FS/°C max. ± 0,02 %/°C typ. ± 0,05 %/°C max. Stainless steel AISI 316L (DIN 1.4404 / 1.4435) Including linearity, hysteresis and repeatability. Linearity calculated as best straight line through zero. Note: Generally, accuracy and overload is improved by factor of 2 to 4 if the sensor is used in the range of 0...50 %FS. High Pressure Version Flat Seal KELLER AG für Druckmesstechnik CH-8404 Winterthur +41 52 235 25 25 info@keller-druck.com ø 16 KELLER Ges. für Druckmesstechnik mbH DE-79798 Jestetten +49 7745 9214 0 eurocenter@keller-druck.com Edition 06/2016 Subject to alterations Companies approved

Open the catalog to page 1

All KELLER catalogs and technical brochures

  1. ECO2

    5 Pages

  2. ARC-1

    7 Pages

  3. KELLER

    36 Pages

  4. Series 26 Y

    2 Pages

  5. Series 26 W

    1 Pages

  6. Handpump K/P

    1 Pages

  7. K-114 BT

    3 Pages

  8. K-114

    3 Pages

  9. 21 ge

    1 Pages

  10. LEO 3

    1 Pages

  11. FA-23

    1 Pages

  12. Series 8

    2 Pages

Archived catalogs