Overview Converters
11Pages

{{requestButtons}}

Catalog excerpts

Overview Converters - 1

Interface Converter Overview

Open the catalog to page 1
Overview Converters - 2

* Supply Unit included in delivery Cable option 1 (cable connections) Cable option 2 (Series 3X/4X [on board] from year 2002) Cable option 3 (Series 3X/4X [on board] from year 2002) Cable option 4 (LEO 1, LEO 2 [on board]) Cable option 5 (Castello, dV-22 PS) Cable option 6 (DCX-18) Cable option 7 (Binder-Fischer adaptor plug) Devices with cable Mano Gauge Mano Record on board = Connector plug inside the device or on the PCB Supply Units Product was replaced or is obsolete free download from the hompage www.keller-druck.com CD with entire KELLER software and drivers

Open the catalog to page 2
Overview Converters - 3

Application (KELLERDevices) Converter with screw-type terminal: • converts RS232 to RS485 half-duplex • RS232-connection: 9-pin D-Sub-plug (f) • RS485-connection: 3-pin screwable plug clamp (RS485 A, RS485 B, GND) • automatic switching between send/receive • baud rates: 9,6 kbit / 115 kbit Converter (isolated) with screw-type terminal: Same as K-102, but: • galvanic isolation • power plug for external transmitters (V+, GND) and supply of K-102I • power supply (15 V) is required and is provided with the converter • RS232 extension cable (1,8 m) included in the scope of delivery Converter...

Open the catalog to page 3
Overview Converters - 4

Application (KELLERDevices) Interface converter with screw-type terminal: • Supply via USB for one connected final consumer (U-Out = 11,8 VDC / I-Outmax = 40 mA) (Supply is provided via an external power supply unit (12–20 VDC) if more than one final consumer is connected) • Screw-type terminal with connection for: +Vcc / GND / RS485A / RS485B • Visual status and configuration display (LED) • Total length: 1 m • galvanic isolation • Software CD and USB connection cable included in the scope of delivery Interface converter with Fischer-plug/ 5-pin: • Supply via USB for one connected final...

Open the catalog to page 4
Overview Converters - 5

Application (KELLERDevices) Interface converter with M12 socket/ 5-pin: • Supply/charging via USB (U-Out = 5 V / I-Outmax = 100 mA) (Fast charging from external power supply unit, 12–20 VDC) • Visual status and configuration display (LED) • galvanic isolation • Total length: 2,3 m • Software CD, power supply and USB connection cable included in the scope of delivery Interface converter with Binder socket 712/5-pin: • Supply via USB for one connected final consumer (U-Out = 11,8 VDC / I-Outmax = 40 mA) • Visual status and configuration display (LED) • galvanic isolation • Total length: 1,75...

Open the catalog to page 5
Overview Converters - 6

Cable adapter (0,3 m) Binder plug Series 723 (m) to strand clips • Transmitters with cable output can be connected Cable adapter (0,3 m) Binder plug Series 723 (m) to 6-pin Molex socket (f) Cable adapter (1,5 m) cable to 2-pin socket • connection to LEO 1 and LEO 2 Cable adapter 5-pin Binder plug Series 723 (m) to 8-pin Binder cable socket Series 423 (f) • suited for dV-2 PS and Castello Cable adapter (0,5 m) 5-pin M12 to 5-pin Fischer socket Series 103 • connection between K-103A and DCX-18 Converter Accessories Cable option 1 Cable option 4 f Cable option 5

Open the catalog to page 6
Overview Converters - 7

Converter Accessories Supply Unit Europe Supply unit 15 V – Europe • DC-Socket • Input: 230 VAC • Output: 15 VDC, 360 mA • Cable length 1,8 m Supply unit 15 V – UK • DC-Socket • Input: 230 VAC • Output: 15 VDC, 360 mA • Cable length 2 m Supply unit 15 V – USA • DC-Socket • Input: 120 VAC • Output: 15 VDC, 360 mA • Cable length 2 m Car adapter cable • Cable length 2 m KELLER Software CD includes all KELLER-Softwares and USBdriver for K-114/K-104 Download for free: www.keller-druck.com USB Cable USB Cable (1 m) • Connection: A Mini/B

Open the catalog to page 7
Overview Converters - 8

The following interface converters and options are no longer required or have been superseded by new products. To ensure compatibility with older KELLER products, some of them can still be supplied: Name Application (KELLERDevices) Intelligent Manometers (IM) and Calibrators Converter cable (2 m) with 2-pin Binderconnector Series 712 m Converter cable with Binder socket Series 723 f Converter with screw-type terminal Converter cable with Fischer plug Series 103 Converter cable with Binder socket Series 723 Converter cable with M12 plug

Open the catalog to page 8
Overview Converters - 10

Plug Assignment of the interface converters K-114A Power supply unit socket K-114 +VCC K-404T f = female m = male n.c. = not connected

Open the catalog to page 10
Overview Converters - 11

Plug Assignment of the cabel options Cabel option 1 Binder Series 723/5-pin (m) 3: +Vcc 2: n.c. 4: RS485-A 5: RS485-B 1: GND Strand clips black white yellow blue red Cabel option 3 Binder Series 723/5-pin (m) 3: +Vcc f = female m = male n.c. = not connected

Open the catalog to page 11

All KELLER catalogs and technical brochures

  1. ECO2

    5 Pages

  2. ARC-1

    7 Pages

  3. KELLER

    36 Pages

  4. Series 26 Y

    2 Pages

  5. Series 26 W

    1 Pages

  6. Handpump K/P

    1 Pages

  7. K-114 BT

    3 Pages

  8. K-114

    3 Pages

  9. 21 ge

    1 Pages

  10. LEO 3

    1 Pages

  11. FA-23

    1 Pages

  12. Series 8

    2 Pages

Archived catalogs