Digital Manometer ECO 2
1Pages

{{requestButtons}}

Catalog excerpts

Digital Manometer ECO 2 - 1

Digital Manometer max.- and min.-function / accuracy 0,5 %FS ECO 2 is a compact and economical digital pressure measuring instrument providing medium accuracy at high resolution and repeatability. The piezoresistive pressure transducer as the heart of the instrument has gone through extensive pressure- and temperature tests. The pressure is measured twice per second and displayed. The top display indicates the actual pressure, the bottom display shows the Max.- or Min.- pressure since the last RESET. ECO 2 has two operating keys. The left key turns on the instrument and is used to select the functions and the pressure units. The right key executes the selected function or unit. The right key is also used to switch between the Max.- and Min.-value. The instrument has the following functions: RESET With the RESET-function, the Max.- and Min.-value is set to the actual pressure value. The ZERO-function allows to set any pressure value as a zero reference. Barometric pressure variations can thus be compensated. The factory setting of the Zero for the range -1...30 bar is at vacuum (0 bar absolute). For relative pressure measurements, activate “ZERO SEt” at ambient pressure. Instruments with the range 0...300 bar are calibrated with the zero at atmospheric pressure. The instrument turns off 15 Min. after the last key function. Activating CONT (Continuous) deactivates this automatic turn-off. All standard instruments are calibrated in bar. The pressure can be indicated in the the following units: bar, mbar/hPa, kPa, MPa, PSI, kp/cm2. ECO 2 has 7/16” UNF male thread and is delivered complete with an O-ring seal swivel fitting which allows ECO 2 to be rotated 360°. Only minimal torque is needed to seal up to 300 bar. Process pressure connection is G 1/4” male. Adapter G 1/4” Optional accessories: - Protective rubber covering - Carrying bag ECO 2 Ei Intrinsically safe version, 94/9/CE (ATEX 100a) Pressure Ranges Resolution Overpressure Accuracy @ Room Temperature * Total Error Band (0...50 °C) Storage-/Operating Temperature Supply Battery Life Pressure Connection Materials in Media Contact Protection Diameter x Height x Depth Weight Instrument / Adapter < 0,5 %FS < 1 %FS (accuracy incl. temperature error)) -20…70 °C / 0…50 °C 3 V battery, type CR 24300 1’000 hours continuous operation 7/16”-20 UNF (adapter G 1/4” included) ECO 2: AISI 316L (DIN 1.4404/1.4435) Swivel: Brass nickel-plated, Nitril O-Rings Adapter: Galvanised steel (9 SMnPb 28K), NBR profile seal IP 65 59 x 95 x 32 mm ≈ 100 g / 40 g Classification: Ex II 1 G EEx ia IICcess T5 T6 or ro Certification File: LCIE 01 ATEX 6001 X in P The EEx ia version tof ECO 2 incorporates an er x-C additionalEE protection switch. Functions, ranges and accuracy are identical to the standard version. * Includes linearity, repeatability, hysteresis and resolution of the display. Does not include Zero stability. Subject to alterations KELLER Ges. für Druckmesstechnik mbH Companies approved to ISO 9001

Open the catalog to page 1

All KELLER catalogs and technical brochures

  1. ECO2

    5 Pages

  2. ARC-1

    7 Pages

  3. KELLER

    36 Pages

  4. Series 26 Y

    2 Pages

  5. Series 26 W

    1 Pages

  6. Handpump K/P

    1 Pages

  7. K-114 BT

    3 Pages

  8. K-114

    3 Pages

  9. 21 ge

    1 Pages

  10. LEO 3

    1 Pages

  11. FA-23

    1 Pages

  12. Series 8

    2 Pages

Archived catalogs