AN Glued laminated timber_201606_en

Product catalog summary

Application Description: The document describes the process of creating glued laminated timber, where timber laminations are planed, sorted, cut to size, and glued together. The glue is heated using microwaves to achieve optimal adhesion at approximately 70°C, with an adhesive layer thickness of about 1 mm.

Measuring Procedure: Sporadic measurements with insertion probes are insufficient. Continuous temperature monitoring during production is recommended to ensure consistent and documentable results.

Solution: The CellaTemp PK(L) 11 non-contact pyrometer is suggested for temperature measurement. It detects infrared radiation quickly and calculates the temperature continuously. The device can be equipped with a target marker and supplementary lens for precise measurements.

Technical Data: The document provides specifications for various models of the PK series pyrometers, including measuring range, focal distance, measurement area size, and measurement uncertainty.

Accessories: Available accessories include shielded cables, mounting angles, and supplementary lenses.

Other Products: The document lists other related products such as portable pyrometers, fiber optics pyrometers, and compact infrared switches, highlighting the extensive range offered by KELLER MSR ITS.

Company Information: KELLER HCW GmbH, a leader in infrared thermometer solutions, offers a wide range of products and services globally, supported by a network of distributors and service centers.

Catalog excerpts

Giued laminated timber Temperature measurement: bonding timber laminations

Open the catalog to page 1

Application note Glued laminated timber Timber laminations are planed and sorted after the drying process. Then they are cut to the required dimension and glue is applied on their flat sides. They are now piled up, forming several layers, and are pressed together. The glue is heated up with microwaves to dry quickly. The highest adhesion of the glue is given at a drying temperature of approximately 70 °C. The adhesive layer has a thickness of approximately 1 mm. Measuring procedure Measurements with insertion probes can only be made sporadically. Ideally, the temperature should be detected and...

Open the catalog to page 2

Other products Portix Series Almost indestructible, portable pyrometers with rugged aluminum housing for universal, rapid measurement. CellaTemp PA Series Versatile pyrometers with focusable lens, through-the-lens sighting/ laser spotlight or video camera. CellaPort PT Series Portable single-colour and two-colour pyrometers with through-the-lens sighting, laser spot light and USB interface. CellaTemp PA-LWL Versatile fiber optics pyrometers with focusable head and laser spotlight. Mikro PV Intensity comparison pyrometer for ultra accurate measurement. Since 1968, the Division of MSR Infrared...

Open the catalog to page 3