Dry separator L-CUT
4Pages

Separation technology dust collector L-CUT Effective and hazard-free filtration and separation of combustible dusts from thermal processes. Metal oxides created during laser processes can be separated safely and space-saving. TRGS 560 requirements are met with the optional H13 secondary filter and clean air recirculation back into the room is possible.

All metals and non-metals Joining soldering, welding cutting, milling, grinding Surface Treatment hardening, engraving, laminating The L-CUT series has been specially developed for the collection of dust and fumes caused by thermal processes such as joining, separating, or surface treatment by laser, plasma or gases, to separate the finest of metal oxide particles. These units are compact and have a very low profile. Therefore, they can be installed in tight spaces. The spark pre-separator KSE is already integrated in the housing. Filter housing The housing is of welded design with a...

Technical data L-CUT Unit type L-CUT Sound Level 1 m in front of the door, measured according to DIN EN ISO 3744, with connected suction ductwork. Functional description Dirty air flows through the dirty air inlet (10) into the spark pre-separator (11) where larger particles are separated. The collected dust can be emptied during operation by closing the manual slide gate. The separated dust is compressed in the disposal container (8) by means of a dust compression nozzle (18). Air is deflected after the spark preseparator (11) which reduces speed when the air contacts the filter elements...

Separation technology dust collector L-CUT Keller Lufttechnik GmbH + Co. KG