*mydirectindustry

8900 Series

Product catalog summary

Overview
The document details the specifications, dimensions, and configurations of the 8900 Series High Density Connectors with a 50mil (1.27mm) pitch. These are two-piece connectors designed for various mating styles including horizontal, vertical, and stacked mating.

Connector Types and Variations
- The series includes plugs and receptacles.
- Variants include models with and without flanges and hooks (e.g., 8911 and 8913 series).
- Mating configurations cover horizontal, vertical, and stacked combinations.
- Standoff heights are categorized as A, B, C, or D, ranging approximately from 7mm to 12mm.

Mechanical Dimensions and Mounting
- Mated distances vary by standoff height and connector type, with typical values around 9.1mm to 12.1mm.
- Maximum mounting hole dimensions and distances are specified, with mounting hole centers typically around 3±0.5mm.
- Recommended PCB thickness is 1.6±0.19mm.

Pitch and Contact Details
- The pitch between contacts is 1.27mm (0.050 inch).
- Contact counts range from 20 to 120.
- Polarity identification is provided for proper orientation.

PCB Layout and Footprint
- Detailed PCB layout dimensions are provided for component side views.
- Layouts include hole sizes, spacing, and polarity markings.
- Specific dimensions for different contact counts and connector types are tabulated.

Product Tables and Dimensions
- Multiple tables list part numbers corresponding to contact counts and connector types.
- Dimensions A, B, C, D, E, and F are provided in millimeters and inches for each part number.
- Packaging styles and quantities per package are indicated.

Connector Series Specifics
- 8901 series: Receptacles with flanges and hooks.
- 8903 series: Receptacles without flanges and hooks.
- 8911 series: Plugs with flanges and hooks.
- 8913 series: Plugs without flanges and hooks.
- Both straight and right-angle types are available.

Key Parameters and Recommendations
- Standoff heights affect mated distances and mounting requirements.
- Polarity identification is critical for correct assembly.
- PCB layout must follow specified hole sizes and spacing for reliable connection.
- Packaging information assists in logistics and inventory management.

Limitations and Notes
- Specifications and dimensions are subject to change without notice.
- Careful attention to polarity and mechanical dimensions is necessary to ensure compatibility.

This summary captures the essential technical data and configuration options for the 8900 Series High Density Connectors, facilitating selection, design integration, and assembly planning.

Catalog excerpts

HIGH DENSITY CONNECTORS 50mil(1.27mm) PITCH 2 PIECE CONNECTOR

Open the catalog to page 1

BORDER CODE • Standoff height (Straight type only) (without alignment plate) (without alignment plate) (with alignment plate) (without alignment plate) (with alignment plate) -• Plating of contact area -• Contact tail style L : Right angle (with flanges only) -• Contact name 8901 : With flanges and hooks 8903 : Without flanges and hooks 8911 : With flanges and hooks 8913 : Without flanges and hooks • Please consult sales office regarding non-standard items. * See the table on page B-5 for 10mm mating height combinations. • Low insertion and withdrawal force • Mating process is reliable and self-aligning...

Open the catalog to page 2

8900 SERIES LOW PROFILE CONNECTORS Mating Variations Vertical Mating Horizontal Mating Mounting hole Mounting hole Stacked Mating Mounting hole Mounting hole Standoff Height Standoff Height Additional mating combinations shown below. With flanges and hooks Without flanges and hooks Selection Guide Type Plug Receptacle series without flanges and hooks Plug Receptacle 8903-ȞȞȞ -177SȞ-Ȟ-F 8901-ȞȞȞ -177SȞ-Ȟ-F 89Ȟ1 series with flanges and hooks

Open the catalog to page 3

8900 SERIES LOW PROFILE CONNECTORS (Receptacle, With flanges and hooks) Unit:mm(inch) Receptacle (Straight Type) A, B type (Standoff height) Polarity identification Standoff height B±0.15(B±0.006) =Polarity identification Recommended PCB Thickness t =1.6±0.19(0.063±0.007) “n” is number of contacts. Packaging style Product Table / Dimensions No.of contacts Part Number Printed Circuit Board Layout (Component Side View)

Open the catalog to page 4

8900 SERIES LOW PROFILE CONNECTORS 8903- ȞȞȞ -177SȞ - Ȟ-F (Receptacle, Without flanges and hooks) Unit:mm(inch) Receptacle (Straight Type) A, B type (Standoff height) Polarity identification Standoff height =Polarity identification Recommended PCB Thickness t=1.6±0.19(0.063±0.007) “n” is number of contacts. Product Table / Dimensions No.of contacts Part Number Printed Circuit Board Layout (Component Side View)

Open the catalog to page 5

8900 SERIES LOW PROFILE CONNECTORS 8901- ȞȞȞ -177LȞ -F (Receptacle, With flanges and hooks) Unit:mm(inch) Receptacle (Right Angle Type) Polarity identification Center of the mounting hole Printed Circuit Board Layout (Component Side View) B±0.15(B±0.006) =Polarity identification Recommended PCB Thickness t=1.6±0.19(0.063±0.007) “n” is number of contacts. Product Table / Dimensions No.of contacts Part Number Packaging style

Open the catalog to page 6

8900 SERIES LOW PROFILE CONNECTORS 8911- ȞȞȞ -178SȞ - Ȟ-F (Plug, With flanges and hooks) Unit:mm(inch) Plug (Straight Type) A type (Standoff height) Standoff height Polarity identification B±0.15(B±0.006) =Polarity identification Recommended PCB Thickness t =1.6±0.19(0.063±0.007) “n” is number of contacts. Product Table / Dimensions No.of contacts Part Number Printed Circuit Board Layout (Component Side View)

Open the catalog to page 7

8900 SERIES LOW PROFILE CONNECTORS (Plug, Without flanges and hooks) Unit:mm(inch) Plug (Straight Type) Standoff height Polarity identification A type (Standoff height) =Polarity identification Recommended PCB Thickness t=1.6±0.19(0.063±0.007) “n” is number of contacts. Packaging style Product Table / Dimensions No.of contacts Part Number Printed Circuit Board Layout (Component Side View)

Open the catalog to page 8

8900 SERIES LOW PROFILE CONNECTORS (Plug, With flanges and hooks) Unit:mm(inch) Plug (Right Angle Type) Center of the mounting hole Printed Circuit Board Layout (Component Side View) For 30,50 contacts 2-␾ 2.3±0.1 n-1 (0.091␾ ±0.004) n Edge of the PC board 1.27±0.05(0.050±0.002) n / 2-␾ 0.65 min. (␾ 0.026) B±0.15(B±0.006) =Polarity identification Recommended PCB Thickness t=1.6±0.19(0.063±0.007) “n” is number of contacts. Packaging style Product Table / Dimensions No.of contacts Part Number Specifications and dimensions are subject to change without notice.

Open the catalog to page 9

8900 Series

8900 Series

Catalog excerpts

All KEL CORPORATION catalogs and technical brochures