C3V series
2Pages

{{requestButtons}}

Catalog excerpts

C3V series - 1

C3V series is an innovative electronic component intended for broadband filtering of electromagnetic interferences (EMI) and suppression of voltage spikes generated in electronic circuits. This high-level dual protection is required or recommended for integration in electrical motors or within corresponding subassemblies, where on/off switching during operation generates inductive loads, further triggering voltage spikes. As a result, broadband electromagnetic interferences (EMI) are generated in the frequency domain, rising noise and disturbance levels, which affect the performance or possibly damage sensitive electronic elements that are integrated near-by in the electrical circuit. - Operating voltage range Vdc 16,20,26, 38 and 56 V - Capacitance Cl range C 470 nF to 1,5 p F - Capacitance C2, C3 range C 1 nF to 100 nF - Capacitor Cl and C2, C3 temperature characteristics X7R - Protects against electromagnetic interferences (EMI) and voltage disturbances. - Dimensional and weight savings on board. -SMD version. - Available on tape and reel for automatic insertion equipment. - RoHS 2 2011/65/EC , REACH, GADSL compliant. - AEC-0200 Grade 1 qualified. Steady State Applied Voltage: - DC Voltage Range (Vdc): 16 V to 56 V - AC Voltage Range (Vrms): 14 V to 40 V TRANSIENT: - Load Dump Energy (WLD): 6J - Jump Start Capability -5 minutes (Vjump): 24,5 V to 65 V - Non-Repetitive Surge Current 8/20 ps Waveform (Imax): 800 A - Non-Repetitive Surge Energy 10/1000 p S Waveform (Wmax): 2,4 J to 4,8 J - Capacitor Temperature Characteristics: X7R - Operating Ambient Temperaturee-40 °C to 125 °C - Storage Temperature Range: -40 °C to 150 °C - Isolation Voltage Capability: > 1,25 kV

Open the catalog to page 1
C3V series - 2

ELECTRONIC COMPONENT WITH STACKED ELEMENTS -C3V SERIES Reduces terminals from 8 to 3 Reduces needed space Reduces errors during installing elements Reduces time to install elements - Better results suppressing radiated and conductive emissions in comparison to discrete components - Very good overcurrent and overvoltage protection - Combines four passive elements in one component SMD SIZE PARAMETERS & SOLDERING PAD CONFIGURATION: APPLICATION CIRCUITS Elimination of electromagnetic interferences (EMI) and voltage disturbances generated by DC brush motor:

Open the catalog to page 2

All Keko Varicon catalogs and technical brochures