CHOSEN BY LEADING COMPONENT MANUFACTURERS WORLDWIDE • Suitable for freestanding or tapes on carrier film • Trims edges • Transfers the blanked sheets to a magazine • Sorts the blanked sheets according to their thickness (previously marked on casting machine) • Custom design • AOI pinhole, cracks detection; output size control; weighing • Barcode registration • Automatic magazine exchange ECONOMIC TAPE PROCESSING

BASIC CONFIGURATION: The SC-series blanker blanks green ceramic sheets from a roll of green tape. The sheets are used on our punching, printing and stacking machines, where sheets, instead of roll of green tapes are loaded. Basic operational steps are: 1) A roll of green tape is loaded in a un-winder, 2) The left and right edges of the ceramic tape are cut to the desired width, 3) Registration holes are (optionally) punched on the sheet’s edges, 4) The sheet is cut to the desired length, and, 5) Individual sheets are collected in a magazine. An antistatic device prevents electrostatic charge...