- Catalogs
- Keko Equipment d.o.o.
- PAM - series
PAM - series
PAM - series
- Punching via and registration holes in green tape.
- Compatible with manual programming, CAD input, NcDrill, and DXF files.
- Equipped with tool breakage detection and automatic sheet alignment for re-punching.
- Punching speed: 20 holes/s with a distance of 1 x 1 mm.
- Punching area: Up to 225 x 225 mm (9 x 9 inches).
- Tape thickness: Up to 500 microns (20 mils).
- Positioning accuracy: +/- 5 microns.
- Control: High precision ball screw and AC servo motors.
- Safety: CE compliant.
- Single Pin Tool: Pneumatic driven, max area 45 x 45 mm, round pins 0.1 - 5 mm, square pins 0.5 x 0.5 - 3 x 3 mm.
- Grid Tool: Servo motor driven, max distance between round pins 6 mm, round pins 0.1 - 3 mm, square pins 0.5 x 0.5 - 3 x 3 mm.
Catalog excerpts
CHOSEN BY LEADING COMPONENT MANUFACTURERS WORLDWIDE • Punch via and registration holes in green tape • Suitable to punch most via forming designs • Manual programming, CAD input, NcDrill and DXF files • Tool breakage detection • Automatic sheet alignment for re-punching
Open the catalog to page 1
The PAM series of punching machines are mainly designed for LTCC and HTCC applications, where it’s required to be able to punch all kinds of patterns. The PAM series uses single pin punching tool or grid tool to punch via holes, registration holes or cavities in green ceramic tapes, either on carrier film or free-standing. Every hole size is punched using a different tool. Up to 4 or up to 8 different single punching tool dimensions can be installed on the machine. Special multiple pins (gang) punching tools are available in order to punch grid type pattern to increase productivity. Numerous...
Open the catalog to page 2All Keko Equipment d.o.o. catalogs and technical brochures
P - series2 Pages
SC - series2 Pages
H-series2 Pages
BL - series2 Pages