Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Keko Equipment d.o.o.
  3. H-series
video corpo

H-series

H-series
1 / 2 PagesView full catalog

H-series

Product catalog summary
Overview: The H-series tape casters are advanced machines designed for high-output tape casting on carrier films, chosen by leading component manufacturers worldwide. They offer deposition thicknesses ranging from 5 to 500 microns and are suitable for both solvent-based and water-based systems.
Key Features:
  • Automatic tracking of carrier foil and advanced drying regimes for thick tape production.
  • High accuracy in thickness control and stability with options for slotted die, comma roll, or doctor blade coating principles.
  • Advanced slurry dosage control and automatic high accuracy gap setting control.
Technical Specifications:
  • Casting speed adjustable from 0.1 to 6 m/min.
  • Carrier tape width options: 350 mm, 450 mm, or 600 mm.
  • Casting width up to 200 mm, 380 mm, or 500 mm.
  • Dry tape thickness ranges from 5 to 500 microns with a thickness accuracy of +/- 1 micron.
  • Carrier film thickness between 20 to 120 microns.
Drying Zones: The drying process is divided into multiple zones:
  • First zone: Low drying speed.
  • Second zone: Drying with air re-circulation and bottom heating.
  • Third zone: High-speed final drying by air nozzles and bottom heating.
Customization Options: The casters can be customized with options such as tape edge cutting, up to 5 different drying zones, drying zone extensions, safety packages, data links for external monitoring, and tape thickness measurements with marking.
Ordering Information: Specify options and requirements separately. The model number (CAM-Hxxx) indicates the maximum PET film width in cm, with drier lengths available from 6 to 20 meters in 3-meter steps.
Contact Information: For more details, contact Keko Equipment at Grajski trg 15, 360 Žužemberk, Slovenija, or visit their website at www.keko-equipment.com.
See more

Catalog excerpts

H-series-1

CHOSEN BY LEADING COMPONENT MANUFACTURERS WORLDWIDE • Deposition thicknesses 5 to 500 microns (0.2 to 20 mils) • Suitable for solvent based and water based systems • Automatic tracking of carrier foil • Advanced drying regimes possible • High accuracy in thickness control and stability • Slotted die, comma roll or dr. blade coating principles possible • Advanced slurry dosage control • Automatic high accuracy gap setting control

 Open the catalog to page 1
H-series-2

The CAM- H series of tape casters are our most advanced tape casters suitable for highest production demands. Advanced drying regimes makes them very suitable for thick tape production. Numerous temperature and air flow sensors are installed for process control. The automated continuous slurry dosage flows through a slotted die system with +/-10 micrometer (0.4 mils) slurry level height control on the casting box. Fully automatic casting gap control, with auto zero calibration. The process can be continuos monitored on a touch screen or an external PC. Preset menus can be use to quickly start...

 Open the catalog to page 2

All Keko Equipment d.o.o. catalogs and technical brochures

  1. P - series
    P - series

    2  Pages

  2. PAM - series
    PAM - series

    2  Pages

  3. SC - series
    SC - series

    2  Pages

  4. BL - series
    BL - series

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.