Catalogs >
Keithley Instruments >
TPA-N-PRE Datasheet

TPA-N-PRE Datasheet
4Pages

Catalog excerpts

TPA-N-PRE Datasheet TPA-N-PRE Pre-Amp • Measurement of low-power signals TPA-N-PRE Preamplifier The TPA-N-PRE preamplifier accessory for the MDO4000 and MDO3000 Series Mixed Domain Oscilloscopes provides 12 dB nominal gain, further lowering the already low noise floor in the MDO4000 and MDO3000 Series. This allows you to pull very small signals out of the noise in low-amplitude signal applications. For example, in the following screenshot we are measuring a noise floor of -114 dBm (-154 dBm/Hz) without the TPA-N- PRE preamplifier. It appears that there is only noise present. In the screenshot below, we've turned on the preamplifier. Notice that the noise floor has dropped to -124 dBm (-164 dBm/Hz). As a result of the noise floor dropping significantly, we're now able to see a -116 dBm signal present at 900 MHz that was hidden in the noise without the preamplifier.

Open the catalog to page 1

Datasheet Specifications General Specification Frequency range Preamp alone: 9 kHz to 6 GHz Preamp and MDO: Frequency range specified by the MDO's frequency range Preamp gain Amplifying state: +12 dB (nominal) Bypass state: -1.5 dB (nominal) Displayed average noise level (DANL) with the preamp attached to the MDO RF input With the preamp mode set to “Auto” and the reference level set to -40 dBm (MDO4000 Series) or -30 dBm (MDO3000 Series): MDO4000C with SA6 option: 9 kHz to 50 kHz: < -119 dBm/Hz (-123 dBm/Hz typical) 50 kHz to 5 MHz: < -140 dBm/Hz (-144 dBm/Hz typical) 5 MHz to 400 MHz: <...

Open the catalog to page 2

Power Requirements Environmental Description The TPA-N-PRE is powered directly from the RF input on MDO4000 and MDO3000 Series oscilloscopes. Compliance labeling: WEEE (European Union). Specification Temperature Humidity Operating Recommended Oscilloscopes MDO4000 and MDO3000 Mixed Domain Oscilloscopes Warranty information One year parts and labor. Attitude Operating

Open the catalog to page 3

Ordering Information TPA-N-PRE MDO4000 and MDO3000 Pre-Amplifier. Includes Instruction Manual (English) (071-3058-XX) Calibration Service 3 years (initial certification, plus 2 calibrations). Calibration Service 5 years (initial certification, plus 4 calibrations). Repair Service. Repair warranty extended to cover 3 years. Repair Service. Repair warranty extended to cover 3 years. Additional Service Products Available During Warranty (DW) TPA-N-PRE R3DW – Repair Service Coverage 3 Years (includes product warranty period). 3-year period starts at time of customer instrument purchase Repair...

Open the catalog to page 4