Series 2260BProgrammable DC Power Supplies Datasheet Source a wide range of voltages and currents with the 360 W, 720 W, or 1080 W Series 2260B Programmable DC Power Supplies. Choose from 12 versions with voltage output of 30 V, 80 V, 250 V, or 800 V. The 360 W versions can output current of 36 A, 13.5 A, 4.5 A, or 1.44 A; the 720 W models can output 72 A, 27 A, 9 A, or 2.88 A; and the 1080 W instruments can output 108 A, 40.5 A, 13.5 A, or 4.32 A. This wide range of output voltages and current, combined with multiple interface choices, makes the Series 2260B ideal for use in a wide range of applications, including research and design, quality control, and production test. • Environmental test, stress test, and accelerated life testing • LED and high power component testing • Automotive testing • Battery research and test • Production test • 360 W, 720 W, and 1080 W versions with voltages up to 800 V and currents up to 108 A • Programmable voltage or current rise and fall times prevents damage to low impedance loads from inrush current • Constant current priority setting reduces voltage and current overshoot when powering LEDs • Programmable internal resistance simulates battery output • Choose from analog control, USB, LAN, or optional GPIB interface for automated control • Fit six 71 mm wide 360 W units or three 142 mm wide 720 W units or two 214 mm wide 1080 W units in a standard rack width to minimize bench and test system space Series 2260B power supplies have programmable rise time (or slew rate) control to prevent potentially dangerous inrush currents from flowing into loads that have low resistance when power is initially supplied. Either voltage or current rise time can be controlled. With voltage slew rate control, voltage rise time can range from a slow, 0.1 V/s to a high speed of 1600 V/s for the 800 V supplies. When operating under constant current control, output current rise time can be programmed from a low slew rate of 0.001 A/s to a maximum value of 216 A/s for the 2260B-30-108. Programming a current rise time puts

Datasheet the Series 2260B power supplies in a constant current control priority mode in which the current slew rate limits the rate at which the voltage rises across the device under test (DUT.) In addition to controlling rise time, fall time can also be programmed; fall time values can be different from rise time values. Delivery of power to a load can be precisely controlled to prevent overshoot spikes and excessive amounts of inrush current, eliminating damage to components, modules, or devices and generating more precise characteristic I-V curves for components such as LEDs. Precisely control...

Series 2260B Programmable DC Power Supplies Create Custom Voltage Source Waveforms An internal test sequence mode allows the Series 2260B supplies to output a set of voltage levels for varying time intervals at each level. The test sequence can be stored and used repeatedly to determine DUT performance at number of voltage levels. In addition, the analog input control can be used to create voltage profiles that simulate how a battery responds to a fast changing load current requirement such as a large inrush current. Also, generate a combined DC output level with an AC signal superimposed on...

Regulation (CV) Load: 0.05% of setting + 5 mV. Line: 0.05% of setting + 3 mV. Regulation (CC) Load: 0.1% of setting + 5 mA. Line: 0.1% of setting + 5 mA. Voltage Slew Rate Range: Rising and Falling

Series 2260B Programmable DC Power Supplies Current Slew Rate Range: Rising and Falling 0.01 A/s to 72.00 A/s (2260B-30-36). 0.1 A/s to 144.0 A/s (2260B-30-72). 0.1 A/s to 216.0 A/s (2260B-30-108). 0.01 A/s to 27.00 A/s (2260B-80-13). 0.01 A/s to 54.00 A/s (2260B-80-27). 0.01 A/s to 81.00 A/s (2260B-80-40). 0.001 A/s to 9.000 A/s (2260B-250-4). 0.01 A/s to 18.00 A/s (2260B-250-9). 0.01 A/s to 27.00 A/s (2260B-250-13). 0.001 A/s to 2.880 A/s (2260B-800-1). 0.001 A/s to 5.760 A/s (2260B-800-2). 0.001 A/s to 8.640 A/s (2260B-800-4). Maximum Voltage Drop in Each Load Wire When Using Remote Sense...

Analog Control External voltage or resistance control of output, voltage and current monitor outputs, turn-on, turn-off control, status monitoring, 26-pin connector (rear panel). Interface USB: 1.1/2.0,Type A host (front panel), Type B control (rear panel). GPIB: (with optional 2260B-GPIB-USB Adapter). AC Input Range 85 VAC-265 VAC, 50/60 Hz, single phase. Power Factor 0.97 to 0.99 (typical). Fan With thermal sensing control Temperature Coefficient (after 30 minutes warm-up) Safety Complies with European Union Low Voltage Directive. Electromagnetic Compatibility Complies with European Union EMC...

Series 2260B Programmable DC Power Supplies 2260B Basic Accessory Kit (for 30 V and 80 V models) 2260B-010 Basic Accessories Kit (for 250 V/800 V Series) Test Lead Set (for 30 V and 80 V models) 2260-009 Test Lead (for 250 V/800 V models) USB Cable Power Cord Certificate of Traceable Calibration 2260B-RMK-JIS Rack Mount Kit (JIS racks) 2260B-RMK-EIA Rack Mount Kit (EIA racks) Available Services Model Number1-EW 3-year factory warranty extended to 1 additional year from date of shipment Model Number1-5Y-EW 3-year factory warranty extended to 5 years from date of shipment C/Model Number1-3Y-STD...

Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777 Find more valuable resources at TEK.COM Copyright © Tektronix. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specification and price change privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. All other trade names referenced are the service marks, trademarks or registered trademarks of their respective companies. European toll-free number. If not accessible,...