4 Series MSO Mixed Signal Oscilloscope Datasheef

Strength in numbers Input channels • 4 or 6 FlexChannel® inputs • Each FlexChannel provides: One analog signal that can be displayed as a waveform view, a spectrum view 1 or both simultaneously Eight digital logic inputs with TLP058 logic probe Bandwidth (all analog channels) • 200 MHz, 350 MHz, 500 MHz, 1 GHz, 1.5 GHz (upgradable) Sample rate (all analog / digital channels) • Real-time: 6.25 GS/s Record length (all analog / digital channels) • 31.25 Mpoints standard (62.5 Mpoints optional upgrade) Waveform capture rate • >500,000 waveforms/s Vertical resolution • 12-bit ADC • Up to 16-bits in...

4 Series MSO Never let a lack of channels slow down your verification and debug process again! The 4 Series MSO offers better visibility into complex systems by offering four and six channel models with a 13.3-inch high-definition (1,920 x 1,080) display. Many applications, such as embedded systems, three-phase power electronics, automotive electronics, power supply design, and DC-toDC power converters, require the observation of more than four analog signals to verify and characterize device performance, and to debug challenging system issues. With a six FlexChannel model, you can configure...

Channel 2 has a TLP058 Logic Probe connected to the eight inputs of a DAC. Notice the green and blue color coding, where ones are green and zeros are blue. Another TLP058 Logic Probe on Channel 3 is probing the SPI bus driving the DAC. The white edges indicate higher frequency information is available by either zooming in or moving to a faster sweep speed on the next acquisition. Waveform View ten n iinn n 11 nnnnnn n n teim nn m in nn nnnn n n n i i nnnn nn jnn nnn i i nnn nnnn nnnn nn nnn n n nnnnnn n n nnn n n nnnnnn n n n i in nn nnnn nn nn nnnn nn m m nn nnnn nn nn nnnn nn 11 nnn nnnn nnnn...

4 Series MSO Unprecedented signal viewing capability The stunning 13.3-inch (338 mm) display in the 4 Series MSO is the largest display in its class. It is also the highest resolution display, with full HD resolution (1,920 x 1,080), enabling you to see many signals at once with ample room for critical readouts and analysis. The viewing area is optimized to ensure that the maximum vertical space is available for waveforms. The Results Bar on the right can be hidden, enabling the waveform view to use the full width of the display. Stacked display mode enables easy visibility of all waveforms while...

Viewing three analog channels, eight digital channels, a decoded serial bus waveform, decoded serial packet results table, four measurements, a measurement histogram, measurements results table with statistics and a search on serial bus events - simultaneously! Exceptionally easy-to-use user interface lets you focus on the task at hand The Settings Bar - key parameters and waveform management Waveform and scope operating parameters are displayed in a series of “badges” in the Settings Bar that runs along the bottom of the display. The Settings Bar provides Immediate access for the most common...

Touch interaction finally done right Scopes have included touch screens for years, but the touch interface has been an afterthought. The 4 Series MSO's display includes a capacitive touchscreen and provides the industry's first oscilloscope user interface truly designed for touch. The touch interactions that you use with phones and tablets, and expect in a touch enabled device, are supported in the 4 Series MSO. • Drag waveforms left/right or up/down to adjust horizontal and vertical position or to pan a zoomed view • Pinch and expand to change scale or zoom in/out in either horizontal or vertical...

Datasheet Experience the performance difference Digital Phosphor technology with FastAcq™ highspeed waveform capture To debug a design problem, first you must know it exists. Digital phosphor technology with FastAcq provides you with fast insight into the real operation of your device. Its fast waveform capture rate - greater than 500,000 waveforms per second - gives you a high probability of seeing the infrequent problems common in digital systems: runt pulses, glitches, timing issues, and more. To further enhance the visibility of rarely occurring events, intensity grading indicates how often...

Multiple channel triggering. Visual Trigger areas can be associated with events spanning multiple channels, such as triggering on a specific burst-width on channel 1 and a specified bit pattern on channel 2. The wide variety of trigger types and context-sensitive help in the trigger menu make it easier than ever to isolate the event of interest. Visual Trigger - finding the signal of interest quickly – Finding the right cycle of a complex bus can require hours of collecting and sorting through thousands of acquisitions for an event of interest. Defining a trigger that isolates the desired event...

Datasheet TekVPI Probe Interface ® The TekVPI probe interface sets the standard for ease of use in probing. In addition to the secure, reliable connection that the interface provides, many TekVPI probes feature status indicators and controls, as well as a probe menu button right on the comp box itself. This button brings up a probe menu on the oscilloscope display with all relevant settings and controls for the probe. The TekVPI interface enables direct attachment of current probes without requiring a separate power supply. TekVPI probes can be controlled remotely through USB or LAN, enabling...

4 Series MSO Comprehensive analysis for fast insight Basic waveform analysis Verifying that your prototype's performance matches simulations and meets the project's design goals requires careful analysis, ranging from simple checks of rise times and pulse widths to sophisticated power loss analysis, characterization of system clocks, and investigation of noise sources. The 4 Series MSO offers a comprehensive set of standard analysis tools including: Waveform- and screen-based cursors 36 automated measurements. Measurement results include all instances in the record, the ability to navigate from...