Catalogs >
Keithley Instruments >
2000 Series: 6½-Digital Multimeter with Scanning

2000 Series: 6½-Digital Multimeter with Scanning
5Pages

Catalog excerpts

2000 Series: 6½-Digital Multimeter with Scanning - 1

The Model 2000 6½-Digit Multimeter is part of Keithley’s family of high performance DMMs. Based on the same high speed, low noise A/D converter technology as the Model 2001 and 2002, the 2000 is a fast, accurate, and highly stable instrument that’s as easy to operate as it is to afford. It combines broad measurement ranges with superior accuracy specifications — DC voltage from 100nV to 1kV (with 0.002% 90-day basic accuracy) and DC resistance from 100µW to 100MW (with 0.008% 90-day basic accuracy). Optional switch cards enable multiplexing up to 20 different input signals for multipoint measurement applications. • 13 built-in measurement functions • 2000 readings/second at 4½ digits • Optional scanner cards for multipoint measurements • IEEE-488 and RS-232 interfaces • Fluke 8840/42 command set Ordering Information 2000 6½-Digit DMM 2000/2000-SCAN 6½-Digit DMM/ Scanner Combination Accessories Supplied Instruction Manual and Model 1751 Safety Test Leads Digital Multimeters & SYSTEMS 10-channel, General-Purpose Scanner Card 10-channel Scanner Card with two high-speed channels 9-channel, Thermocouple Scanner Card with built-in cold junction Cables/Adapters 7007-1 Shielded IEEE-488 Cable, 1m (3.3 ft) 7007-2 Shielded IEEE-488 Cable, 2m (6.6 ft) 7009-5 RS-232 Cable Rack Mount Kits 4288-1 Single Fixed Rack Mount Kit 4288-2 Dual Fixed Rack Mount Kit GPIB Interfaces KPCI-488LPA IEEE-488 Interface/Controller for the PCI Bus KUSB-488B IEEE-488 USB-to-GPIB Interface Adapter High Throughput The 2000 offers exceptional measurement speed at any resoution. At 6½ digits, it delivers l 50 triggered rdgs/s over the IEEE-488 bus. At 4½ digits, it can read up to 2000 rdgs/s into its internal 1024 reading bufer, making it an excelf lent choice for applications where throughput is critical. For benchtop or stand-alone applications, the 2000 has a front panel design that’s simple to understand and easy to use. The 2000 has 13 built-in measurement functions, including DCV, ACV, DCI, ACI, 2WW, 4WW, temperature, frequency, period, dB, dBm, continuity mea ure s ment, and diode testing. A built-in RS-232 inter face con nects to a notebook or full-sized PC’s serial port to take, store, process, and dis play measurements automatically. Services Available 2000-SCAN-3Y-EW 1-year factory warranty extended to 3 years from date of shipment 2000-3Y-EW 1-year factory warranty extended to 3 years from date of shipment 2001-TCSCAN-3Y-EW 1-year factory warranty extended to 3 years from date of shipment C/2000-3Y-ISO 3 (ISO-17025 accredited) calibrations within 3 years of purchase for Models 2000, 2000-SCAN* C/2001-3Y-ISO 3 (ISO-17025 accredited) calibrations within 3 years of purchase for Model 2001-TCSCAN* *Not available in all countries General-purpose instrument that’s as easy to operate as it is to afford General-purpose instrument that’s as easy to operate as it is to afford

Open the catalog to page 1

2000 Series: 6½-Digital Multimeter with Scanning - 2

Optional Multiplexer Cards Creating a self-contained multipoint measurement solution is as simple as plugging a scanner card into the option slot on the 2000’s back panel. This ap roach eliminates the complexities p of triggering, timing, and processing issues and helps reduce test time significantly. For applications involving more than 10 measurement points, the 2000 is com atible with Keithley’s p Series 7000 switch matrices and cards. Model 2000-SCAN Scanner Card • Ten analog input channels (2-pole) • Configurable as 4-pole, 5-channel Model 2001-SCAN Scanner Card • Ten analog input...

Open the catalog to page 2

2000 Series: 6½-Digital Multimeter with Scanning - 3

DC Characteristics MED (1 PLC)1 or SLOW (10 PLC) or MED (1 PLC) with filter of 10 Continuity 2W Diode Test Accuracy: ±(ppm of reading + ppm of range) (ppm = parts per million) (e.g., 10ppm = 0.001%) Test Current or Burden Voltage DC Operating Characteristics 2 Function DCV (all ranges), DCI (all ranges), and 2W Ohms (<10M range) Digital Multimeters & SYSTEMS DC Notes 1. Add the following to ppm of range accuracy specification based on range:1V and 100V, 2ppm; 100mV, 15ppm; 100W, 15ppm; <1MW, 2ppm; 10mA and 1A, 2ppm; 100mA, 20ppm. 2. Speeds are for 60Hz operation using factory default...

Open the catalog to page 3

2000 Series: 6½-Digital Multimeter with Scanning - 4

True RMS AC Voltage and Current Characteristics Accuracy 1: ±(% of reading + % of range), 23°C ±5 °C Calibration Cycle 90 Day/1 Year 90 Day/1 Year Temperature Coefficient 8 High Crest Factor Additional Error ±(% of reading) 7 Function/Range Change 6: 4/s. Autorange Time: <3s. ASCII readings to RS-232 (19.2k baud) 4: 50/s. Max. internal trigger rate 4: 300/s. Max. external trigger rate 4: 260/s. AC Operating Characteristics 2 Function ACV (all ranges), and ACI (all ranges) Rate SLOW MED MED FAST FAST AC General Input Impedance: 1MW ±2% paralleled by <100pF. ACV Input Protection: 1000Vp....

Open the catalog to page 4

2000 Series: 6½-Digital Multimeter with Scanning - 5

Temperature Characteristics Reading HOLD Sensitivity: 0.01%, 0.1%, 1%, or 10% of reading. Trigger Delay: 0 to 99 hrs (1ms step size). External Trigger Latency: 200µs + <300µs jitter with autozero off, trigger delay = 0. Memory: 1024 readings. Digital Multimeters & SYSTEMS Temperature Notes Rel, Min/Max/Average/StdDev (of stored reading), dB, dBm, Limit Test, %, and mX+b with user defined units displayed. dBm Reference Resistances: 1 to 9999W in 1W increments. For temperatures <–100°C, add ±0.1°C and >900°C add ±0.3°C. Temperature can be displayed in °C, K or °F. Accuracy based on ITS-90....

Open the catalog to page 5