*mydirectindustry

Catalogs
KEE SAFETY
Roof Edge Protection for Metal Roofs

Roof Edge Protection for Metal Roofs

Product catalog summary

Overview
The document outlines the KeeGuard® Topfix roof edge protection solution designed for metal profile and standing seam roofs. It emphasizes collective protection, modularity, and compliance with safety standards.

Specifications

Suitable for metal profile and standing seam roofs up to a 45-degree pitch.
Available in galvanized steel or aluminum finish.
Fixing centers for standing seam roofs: 305, 400, and 500mm.
Fixing centers for trapezoidal profile roof panels: 310, 333, 400, and 500mm.
Complies with BS EN 14122 part 3 and EN 13374 Class A standards.

Features and Benefits

Modular 'off the shelf' system simplifies specification and reduces site visits.
Non-penetrative solution for standing seam roofs and watertight fixings for metal profile roofs.
Fast installation with pre-assembled uprights and open cup fittings.
Accommodates various roof features such as ridges, valleys, and corners.
Standard upright base fitting allows for 0-11 degree vertical adjustment.

Installation and Compliance

Base plates for standing seam roofs use non-penetrative 2-part clamps.
Metal profile roofs are fixed with minimal penetrations using rivets and butyl sealing strip.
Complies with BS EN 14122 part 3 and BS EN 13374 Class A, with bay sizes for galvanized EN 14122 at 2.5m (1.75m end bays).

Contact Information
Kee Safety Limited, Cradley Business Park, Overend Road, Cradley Heath, B64 7DW. Tel: 01384 632 188, Fax: 01384 632 192, Email: [email protected], Website: www.keesafety.co.uk

Catalog excerpts

Roof Edge Protection Solution for Standing Seam and Metal Profile Roofs • COLLECTIVE PROTECTION FOR METAL ROOFS • MODULAR ‘OFF THE SHELF’ SYSTEM • AVAILABLE IN GALVANISED STEEL OR ALUMINIUM FINISH • COMPLIES WITH THE TEST REQUIREMENTS OF EN 14122 PT.3 AND EN 13374 CLASS A

Open the catalog to page 1

KeeGuard® Topfix KEEGUARD Topfix provides a roof edge protection solution for metal profile and standing seam roofs up to 45 degree pitch. KEEGUARD Topfix allows for fast installation using preassembled uprights and open cup fittings and easily accommodates ridges, valleys, corners, changes in level and self closing gates etc. using standard KEE KLAMP fittings. The specially designed base plate, which incorporates multiple fixing centres, allows installation to a wide range of popular roofs. Being an ‘off the shelf’ product, specification is simpler and it also removes the need to fabricate a...

Open the catalog to page 2

All KEE SAFETY catalogs and technical brochures

Archived catalogs

The Safety Solution for Skylight Fall Protection Kee dome mini
2 Pages