*mydirectindustry

Catalogs
KEE SAFETY
KeeGuard Roof Edge

KeeGuard Roof Edge

Product catalog summary

Introduction
KeeGuard is a guardrail system by Kee Safety designed for permanent edge protection without penetrating roofing membranes, preventing water damage and noise disturbances.

Unique Systems
The system uses a cantilever principle for strength, suitable for various roof types, including warm deck and inverted flat roofs, and adaptable for industrial cladded pitched roofs with KeeGuard Topfix.

Durability
Components are galvanized to BS EN ISO 1461 and ASTM A53 standards, ensuring a maintenance-free system with stainless steel locking screws and aluminum options.

Component-Based Systems
Utilizes galvanized or aluminum tubing connected via the KEE KLAMP method, with base feet connected to recycled PVC counterweights for stability.

Versatility
KeeGuard systems accommodate various roof shapes, sizes, and details like ductwork and cable trays.

Membrane Protection
Rubber matting and sacrificial pads protect the roof membrane, with pedestrian tiles recommended for warm deck roofs.

Testing & Certification
Tested to EN 13374 Class A, EN ISO 14122 Part 3, NF E85-003, EN 1991-1-4, and BS 6399 Part 2 for wind load compliance.

Official Documentation
Complies with Work at Height Regulations, HSG 33, HSE Construction Sheet No. 21, and EU Directives.

Aesthetics
Standard finishes can be enhanced with powder coating, with raked and radiused systems for improved aesthetics.

Distribution
Available as a supply and installation service or component supply through Kee Safety or licensed distributors.

Industrial Cladded Roofs
KeeGuard Topfix is designed for metal profile and standing seam roofs up to 45°.

Product Specifications
Complies with EN 13374, EN 14122-3, NF E85-003, and North American standards, using steel tubing, galvanized components, and recycled PVC counterweights.

Layout and Testing
Guardrail height is set at 1100mm, with vertical supports at maximum 3m centers, and systems are wind speed calculated to relevant standards.

Components
Includes base foot, elbow connectors, tee connectors, saddle clamps, and counterweights, all made from galvanized malleable cast iron or steel.

Specifications:

Materials: Malleable cast iron, galvanized steel, stainless steel, and PVC, complying with BS 1562, BS EN ISO 1461, ASTM A47-77-32510, and ASTM A53.
Weights: PVC Counter Weight at 13.3kg, European Gate at 11kg.
Standards Compliance: Meets EN 13374, EN 14122-3, and OSHA regulations.

Components:

Collar (74-7): Connects the Cantilever Tube to the Counter Weight.
Two Socket Cross (26-7): Joins two PVC Counter Weights.
Wall/Ladder Clamp (SL109C): Terminates the system against a façade or clamps to a ladder.
European Gate: A spring-loaded, self-closing safety gate available in galvanized and powder-coated finishes.
Base Foot (11308-7510): Supports the system, allowing for 90º or 11º raked back installation.

Assembly Procedures:

Support Leg and Main Rail Tubes: Lay out equipment safely away from the roof edge, ensuring proper spacing according to standards (EN 13374, EN 14122-3, OSHA).
Self-Closing Gate Access Point: Requires additional components like 90° Elbows, PVC Counter Weights, and Cantilever Tubes.
Free Standing End: Involves components like 90° Elbows, PVC Counter Weights, and Two Socket Crosses.
Wall Clamp: Utilizes components such as Three Socket Tee Connectors and Wall Fixings.

Recommendations:

Ensure a minimum distance of 2m from the roof edge during assembly.
Follow specific guidelines for laying out support legs and main rail tubes to maintain system stability.

Specifications and Procedures:
Details assembly and installation procedures for a guardrail system, focusing on PVC Counter Weights and Cantilever Tubes, ensuring compliance with standards like EN 13374, EN 14122-3, and OSHA regulations.

Standards and Recommendations:
Specifies configurations and requirements based on standards EN 13374, EN 14122-3, and OSHA, ensuring system stability and compliance with safety regulations.

Inspection and Maintenance:
Regular inspections by a competent person are recommended every 12 months to verify system integrity, check for unauthorized modifications, and assess for corrosion.

Contact Information:
For assistance or recertification, contact Kee Safety Limited at their Cradley Business Park address or through their provided phone and fax numbers.

Catalog excerpts

KeeGuard Operation & Maintenance Manual

Open the catalog to page 1

KeeGuard System Overview KEE SAFETY GUARDRAIL SYSTEMS Kee Safety’s guardrail system KEEGUARD has been designed specifically to provide permanent edge protection for areas where regular access for maintenance and inspection is required. UNIQUE SYSTEMS Each system’s unique design provides permanent edge protection without the need to mechanically fix the system through the roofing membrane or building’s structure. Their simple cantilever principle provides unrivalled strength, stability and safety and overcomes the problems associated with traditional systems such as having to drill and puncture...

Open the catalog to page 3

KeeGuard System Overview MEMBRANE PROTECTION SYSTEMS Each system is installed with rubber matting bonded to the underside of metal components which come into contact with the roof membrane. In some cases the counter weight and base foot have sacrificial pads placed between the edge protection components and the roof membrane. This protects the roof membrane from damage via heat transfer or direct contact with components. On warm deck roof construction specifications pedestrian tiles are recommended to be placed where base feet and counter weights are in contact with the roof membrane. Where KeeGuard...

Open the catalog to page 4

KeeGuard Compliance to EN 13374 PRODUCT SPECIFICATION - EN 13374 FEATURES:- Standard Vertical, Raked, Radiused System Recycled PVC Counter Weight System GENERAL KeeGuard® systems do not require physical fixing into the roof's structure/membrane. The complete system's design, manufacture, testing and installation has been externally assessed and tested to EN 13374. MATERIALS Steel tubing to BS EN 10255 - 2.9mm. Steel tubing to EN 10255 - 3.2mm. All steel components galvanised to BS EN ISO 1461. Guardrail top and intermediate rails are produced in steel - 48.3mm external diameter. (Wall thickness...

Open the catalog to page 5

KeeGuard Compliance to EN 14122-3 PRODUCT SPECIFICATION - EN 14122-3 & NF E85-003 FEATURES:- Standard Vertical, Raked, Radiused System. Recycled PVC Counter Weight System GENERAL KeeGuard® systems do not require physical fixing into the roof's structure/membrane. The complete system's design, manufacture, testing and installation has been externally assessed and tested to EN 14122-3 & NF E85-003 MATERIALS Steel tubing to EN 10255 (Wall thickness 3.2mm). All steel components galvanised to BS EN ISO 1461. Guardrail top and intermediate rails are produced in steel - 48.3mm external diameter (Wall...

Open the catalog to page 6

KeeGuard Compliance - North America PRODUCT SPECIFICATION – USA & Canada FEATURES:- Standard Vertical, Raked, Radiused System. Recycled PVC Counter Weight System. KeeGuard® systems do not require physical fixing into the roof’s structure/membrane. The complete system’s design, manufacture, testing and installation has been externally assessed. All systems have been tested to:OSHA Reg 29 CFR 1910.23 (E) (1); (E) (3) (IV). OSHA Reg 29 CFR 1926.501 (b) (1); (b) (2) (ii) OSHA Reg 29 CFR 1926.502 (B) (1) - (B) (14) Canadian National Building Code 4.1.10.1(1)(e), 4.1.10.1(2), 4.1.10.1(4) Ontario Building...

Open the catalog to page 7

Typical Edge Protection System Layout FIGURE 1 NOTE: End Detail Refer to Product Specification Standard! 8

Open the catalog to page 8

This unique component provides support to the system and allows the system to be set at 90º or raked back at 11º. The Base Foot connects the Cantilever Tubes and Counter Weights. The base is bonded with fluted rubber matting for membrane protection. Material : Malleable cast iron to BS 1562 and galvanised to BS EN ISO 1461. Net weight : 1.9kg. REPLACEMENT RUBBER PAD - K1351-4080 This open cup fitting provides the method of linking the horizontal Main Rail Tubes to the Support Legs. Material : Malleable cast iron to BS 1562 and galvanised to BS EN ISO 1461. Net weight : 0.77kg. ADJUSTABLE SIDE...

Open the catalog to page 9

KeeGuard Components EN 13374 & EN 14122-3 CANTILEVER TUBE - (1075mm - CBT1) (1575mm - CBT2) This component provides the link between the Counter Weight and Base Foot. Material : Steel tubing to EN 10255 - 3.2mm. All steel components galvanised to BS EN ISO 1461. Cantilever tubes are produced in steel - 42.4mm external diameter. (Wall thickness 3.2mm) First/ last Cantilever tube length 1575mm Net weight : 4.48kg. Intermediate cantilever tube length 1075mm Net weight : 3.26kg. SMALL CANTILEVER TUBE/COUNTER WEIGHT LINK - CBT3 Used in pairs at the end details these components provide the link between...

Open the catalog to page 10

*RECYCLED PVC COUNTER WEIGHT - 440-7 This component provides the means to terminate the system against a façade or clamp the system to a cat ladder/structure where the stringer is a maximum of 70mm wide. Material : Galvanised steel to BS EN ISO 1461. Net weight : 1.1kg. This component provides the stability to the system. Material : Recycled PVC Net weight : 13.3kg. This component is inserted in the first slot of the recycled PVC Counter Weight. The cantilever tube is pushed through this fitting and the grub screw is then tightened. This component provides the connection between the Cantilever...

Open the catalog to page 11

European Gate - Galvanised - SGEU500GV European Gate – Powder Coated - SGEU500PC Spring Loaded, self-closing safety gate. Manufactured from steel to EN 10255. 33.7mm diameter tube x 3.2mm wall thickness to meet requirements of EN 13374 & EN 14122. Complete with fixing pack. Material : Galvanised steel to BS EN ISO 1461. Net weight : 11kg (24lb 4oz). Spring Loaded, self-closing safety gate. Manufactured from steel to EN 10255 33.7mm diameter tube x 3.2mm wall thickness to meet requirements of EN 13374 & EN 14122. Complete with fixing pack. Powder Coated Finish to EN 13438. Material : Steel to...

Open the catalog to page 12

KeeGuard Components - North America This unique component provides support to the system and allows the system to be set at 90º or raked back at 11º. The Base Foot connects the Cantilever Tubes and Counter Weights. The base is bonded with fluted rubber matting for membrane protection. Material : Malleable cast iron to ASTM A47-77-32510 and galvanised to ASTM 153 Net weight : 4lb 3oz. REPLACEMENT RUBBER PAD - K1351-4080 ADJUSTABLE SIDE OUTLET TEE ELBOW - 19-8 This open cup fitting provides the method of linking the horizontal Main Rail Tubes to the Support Legs. Material : Malleable cast iron...

Open the catalog to page 13

All KEE SAFETY catalogs and technical brochures

Archived catalogs

The Safety Solution for Skylight Fall Protection Kee dome mini
2 Pages