Structually Mounted Roof Edge Protection Modules KEE MODULES is a range of pre-designed upright assemblies to enable the quick specification and installation of EN14122 part 3 compliant structurally mounted roof edge protection. Available in size 7 (42.4 mm) size and 8 (48.3 mm) Galvanised Steel or Aluminium. The standard configurations offer side fixing, top fixing or a fitting to enable mounting underneath aluminium copings. Handrails can be in line or offset, with single or double rails and the Uprights can be supplied straight, inclined or radiused. Kee Modules® side fix mounted, handrail tube in-line Features • Galvanised steel or aluminium • Adaptable to many roof configurations • Multiple variations • Conformance to EN ISO 14122 pt3 • No threading, welding or riveting required. Kee Modules® for mounting under aluminium coping, handrail off-set or in-line Benefits • Pre-assembled uprights for quicker installation • No welding, no hot work permits required • Can be adjusted on site to suit local conditions Kee Modules® top fix mounted, handrail tube off-set • Fittings don’t damage any protective coatings applied to the tube • Assured design loads • Consistent appearance • Easily installed by lower skilled and therefore less expensive labour.