*mydirectindustry

Catalogs
KEE SAFETY
Kee Mark Demarcation System

Kee Mark Demarcation System

Product catalog summary

Introduction
The KEEMARK demarcation system is designed to create a high visibility controlled access zone that requires minimal maintenance. It complies with Health & Safety Executive guidance note HSG 33, which emphasizes the need for demarcation systems to be visible and elevated above the main roof decking. The system is not a fall arrest product and is intended to replace inadequate foot-level markings.

Versatile System
KEEMARK is a compact, portable, and easily assembled system featuring a unique post design to prevent chain detachment in adverse weather. The base is made from recycled PVC, weighing 25kg, and supports the system. The high visibility chain, available in polyurethane or steel, links the support posts, which can be set up to 3m apart. The system is suitable for roof demarcation and ground-level applications like trade shows and queue management.

KEEMARK & KeeGuard
For budget constraints, a combination of KEEMARK and KeeGuard edge protection is recommended. KeeGuard should be installed where access is required within 2m of the roof edge, with KEEMARK linking these areas to provide a safe working system.

Components

Upright Kee Mark (KMUP1 & KMUP2): Galvanised components with hook fittings for chain connection, weighing 4kg and 4.5kg respectively.
Steel Chain (KMCS): High visibility chain supplied in 100m rolls, effective length 88m, weight 0.65kg/m.
Plastic Chain (KMC): Polyethylene chain supplied in 25m lengths, effective length 22m, weight 0.055kg/m.
Base and Insert (KMBASE200): PVC base weighing 25kg.
Collar (75-7): Galvanised cast iron component weighing 0.15kg.
Karabiner (KARI8): 8mm steel karabiner, weight 0.08kg.
Sign Fitting (A13-7): Allows fitting of signs up to 3mm thick, weight 1kg.

Recertification
Periodic inspections by a competent person are recommended, at least annually, to ensure system integrity. Inspections should verify the installation configuration, check for unauthorized modifications, and assess component conditions. Corroded components should be treated or replaced, and any significant rust should be documented with photographs.

Contact Information:
Kee Safety Limited, Cradley Business Park, Overend Road, Cradley Heath, West Midlands B64 7DW, Phone: +44 (0) 1384 632 188, Email: [email protected], Website: www.keesafety.co.uk

Catalog excerpts

KeeMark® Operation && Maintenance Manual KeeGuard Operation Maintenance Manual

Open the catalog to page 1

KeeMark® Overview CONTENTS PAGE INTRODUCTION The KEEMARK demarcation system has been designed to provide a high visibility controlled access zone that is virtually maintenance free. This non-fall arrest product has been introduced to satisfy the Health & Safety Executive guidance note HSG 33 Health & Safety in Roofwork which recommends that demarcation systems should be immediately obvious and project above the main roof decking. Section 67 of HSG 33 states that “markings at foot level are not a suitable alternative to a barrier” which implies painted lines on roofs are no longer acceptable as...

Open the catalog to page 2

KEE MARK 25KG BASE AND INSERT - KMBASE200 The base foot is formed from PVC and provides support to the Demarcation System. Material: Recycled PVC & PP. Component weight: 25kg STEEL CHAIN 6MM-KMCS High visibility red and white painted chain links the support posts that are spaced 3m apart. Material: steel. Supplied in 100m long rolls giving an effective length of 88m when installed. Component weight: 0.65kg per metre. UPRIGHT KEE MARK- KMUP1 This component is galvanised to BS EN ISO 1461. The upright comes complete with 1 No 76-7 hook fitting positioned at the top of the tube for connection of...

Open the catalog to page 3

KeeMark® Recertification • Periodic inspections by a competent person are recommended by the manufacturer. In UK/Europe these are required under Regulation 5 of the Workplace (Health, Safety & Welfare) Regulations and the Work at Height Regulations. The frequency will depend upon the environment, location and usage but should be at least every 12 months. • Walk & visually inspect the complete system installation in relation to the client’s needs. Establish if any modifications or additional products are required to reflect any refurbishment or additional plant and equipment that have been installed...

Open the catalog to page 4

All KEE SAFETY catalogs and technical brochures

Archived catalogs

The Safety Solution for Skylight Fall Protection Kee dome mini
2 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list