Catalogs >
KEE SAFETY >
Kee Lite Aluminium Fittings

Kee Lite Aluminium Fittings
2Pages

Catalog excerpts

Kee Lite® Safety Components Guide L148 (/2 & /4 refer to the number of fixing holes) HEAVY DUTY 4 HOLE SQUARE FLANGE HEAVY DUTY RECTANGULAR FLANGE 4 HOLE SQUARE FLANGE Safety Components Guide SMOOTH HANDRAIL FITTING OFFSET WALL FLANGE Kee Lite® Technical Information • • • • • Kee Lite Fittings are made from high grade Aluminium Silicon Magnesium Alloy. Recommended set screw torque is 39Nm. Minimum slip load capacity on aluminium tube: 7.56kN. (safety factor = 2 with tube having a minimum UTS of 275 N/mm²). Large grubscrews are designed to resist thread stripping The core range of Kee Lite Fittings has undergone independent testing by TUV. For current detail of the approved fittings go to www.keesafety.co.uk Kee Lite® Reference Chart BS6180:1999 (specification for guardrail in and around buildings) states that when Aluminium comes into contact with concrete the aluminium surface should have at least 2 coats of Bituminous paint applied. The simple alternative is to use a standard Kee Lite rubber gasket. For highly corrosive environments, stainless steel grubscrews are available at a small additional charge. Kee Lite aluminium fittings are designed to suit BS EN 755 tube. Specifying Kee Lite® Fittings Each fitting has a simple code reference, which defines the type of fitting and the tube size, or sizes, it is designed to receive. The first part, preceding the dash (-) identifies the type of Kee Lite® fitting. A digit, following the dash, defines tube size. A Kee Lite Fitting Type L10 Kee Safety Limited Cradley Business Park Overend Road Cradley Heath West Midlands B64 7DW United Kingdom All three sockets designed to accept tube size 8 • HIGH CORROSION RESISTANCE • LIGHTWEIGHT VERSATILITY • NO WELDING, THREADING OR BOLTING REQUIRED Email: sales@keesafety.com www.keesafety.co.uk KEE LITE is a registered trademark of Kee Safety Limited. Whilst every effort has been made to ensure the accuracy of the information contained in this brochure Kee Safety Limited cannot be held responsible for any errors or omissions. Kee Safety Limited reserves the right to alter or withdraw products without prior notice. Kee Safety Ltd accepts no responsibility for any loss or damage arising from improper use of their products. ©2012 Kee Safety Ltd. All Rights Reserved. KL/SCG_v3/12_12

Open the catalog to page 1

Kee Lite® Safety Components Guide L10 TYPE L10-6 L10-7 L10-8 L10-9 AJUSTABLE SIDE OUTLET TEE STRAIGHT COUPLING SIDE OUTLET ELBOW COMBINATION SOCKET TEE AND CROSSOVER THREE SOCKET CROSS Kee Lite® Safety Components Guide L15 TYPE L15-6 L15-7 L15-8 L15-9 MALE SINGLE SWIVEL SOCKET MEMBER DOUBLE SWIVEL SOCKET MALE DOUBLE SWIVEL SOCKET MEMBER 90° CORNER SWIVEL SOCKET 90° MALE CORNER SWIVEL SOCKET AJUSTABLE ELBOW SWIVEL FLANGE STANDARD RAILING FLANGE BASE PLATE WALL FLANGE FLANGE WITH TOEBOARD ADAPTOR SINGLE SWIVEL SOCKET FEMALE SINGLE SWIVEL SOCKET MEMBER RAIL SUPPORT

Open the catalog to page 2