Catalogs >
KEE SAFETY >
Kee Klamp Slope Fittings

Kee Klamp Slope Fittings
8Pages

Catalog excerpts

Slope Fittings • EXTENDED RANGE NOW AVAILABLE FOR STEEPER GRADIENTS • FITTINGS TOLERANCE ALLOWS FOR ON SITE ANGLE VARIATIONS • ENHANCED AESTHETICS FOR THE FINISHED HANDRAIL • QUICK AND EASY INSTA

Open the catalog to page 1

55A Variable Elbow (11°to 30°) The Type 55A is an ideal fitting to use as an alternative to bending or when a junction between a sloping tube and an end post is required. 427 ThreetoSocket Tee (30° 45°) This fitting is used on a safety railing with slopes between 30° and 45° and fixes the top rail to a vertical intermediate upright 56A Acute Angle Elbow (11°to 30°) Type 56A is an ideal fitting to use as an alternative to bending, or when a junction between a sloping tube and an end post is required i.e. guardrail on staircases between 11° and 30° Type 56 is an ideal fitting to use as an...

Open the catalog to page 3

to Sloping 326 Level Cross (30° Down or Up to 45°) Cross fitting designed for the mid rail on guardrail on slopes and staircases between 30° and 45° at the junction where the handrail changes from either level to sloping down or level to sloping up the stairs F 320RH Right hand level to Sloping Down Side Outlet Elbow (30° to 45°) Right Hand Side Outlet Elbow fitting designed for the top rail on guardrail on slopes and staircases between 30° and 45° at the junction where the handrail changes from level to sloping down the stairs to 321LH Left hand levelSide Sloping Down Tee fitting designed...

Open the catalog to page 4

Load Tables Guardrail Up Slopes 11 to 30 Using Types 55A, 56A, 327, 328, & 329 size 7 & 8 Where the upright remains vertical, i.e. stairways (i) dimension x, Where the upright remains vertical, i.e. stairways (i) dimension x1, x2, x3 to be subtracted from the upright centres; dimension x, x1, x3, y & z to be subtracted from the upright centres; (L) to give the rail length; (ii) dimension y, y1 and y2 for dimension (L) to give the rail length; (ii) dimension u, v and w for determining the up-right length. determining the upright length. ground fixing ground fixing Table 1 gives details of...

Open the catalog to page 5

Load Tables Type 320 RH/LH Type 325A Type 326 ground fixing ground fixing Table 5 gives details of dimensions required for calculating the rail lengths, where angle are be-tween 30° & 45° Table 6 gives details of dimensions required for calculating the rail lengths, where angle are between 30° & 45° Table 6: Rails Fitting Size Fitting Size New Slope Fittings The latest addition to the KEE KLAMP portfolio is an extension to the current range of slope fittings designed to enhance the building of guardrail along staircases and ramps particularly when the slope is greater than 30°. The new...

Open the catalog to page 6

Overend Road West Midlands United Kingdom www.keesafety.co.uk KEE KLAMP, THREDKOAT & KEE KOAT are trademarks of Kee Safety Ltd. Whilst every effort has been made to ensure the accuracy of the information contained in this brochure Kee Safety Ltd cannot be held responsible for any errors or omissions. Kee Safety Ltd re-serves the right to alter or withdraw products without prior notice Kee Safety Ltd accepts no responsibility for any loss or damage arising from improper use of their products. ©2016 Kee Safety Ltd. All Rights Reserved

Open the catalog to page 8