Kee iBolt Brochure
6Pages

{{requestButtons}}

Catalog excerpts

Kee iBolt Brochure - 1

Safety Eyebolt Solutions • CE Approved to PPE Directive • SUITABLE FOR USE IN TENSION AND IN SHEAR • COMPREHENSIVE RANGE OF EYEBOLTS AND ACCESSORIES 0194

Open the catalog to page 1
Kee iBolt Brochure - 2

The Removable Safety Solution for Fall Protection The KEE I-BOLT range offers a comprehensive selection of Class A1 safety anchors. The RINGANKA portfolio comprises three different lengths of eyebolt suitable for use in a range of materials; brick, concrete, masonry and steel. However, it is important that the correct eyebolt is used to suit the material and that the positioning is determined by a competent person. KEYANKA is a removable eyebolt which is unobtrusive where visual presentation is important. Each of the products has been independently tested at the National Engineering...

Open the catalog to page 2
Kee iBolt Brochure - 3

• Independently tested at N.E.L. (National Engineering Laboratory, East Kilbride, • Removable Eyebolt • Produced from Grade 316 Stainless Steel • Flush fitting white plastic cover to blend in with most interior designs • Spring loaded locking action • Variety of fixing options including concrete, brick, steelwork and cavity walls • Optional Stainless Steel or Brass Cap Steelwork - flush No irdlr jsion perm Stand alone cantilever KEY-EXTSOC W^j^ T^^w^H^UiifcK extension socket Keyanka SDckel increased cantilever rnay be achieved by the use of the KEYANKA Extension Socket 1 KEY-STEEL must...

Open the catalog to page 3
Kee iBolt Brochure - 4

Cantilever Sockets for KEYANKA NOTE KtWPCA ixlltl mult bt Utrumwd into apynv vrfcrt KEY-CANT Knurled cantilever socket for use in conjunction with standard KEY-STEEL KEYANKA socket in concrete and masonry. Other Applications KEYANKA bracket to bridge void under floors, above ceilings or behind cladding. For direct axial loading only - unless the cladding etc. provides adequate resistance to bending. Use in conjunction with KEY-STEEL, or, if A is greater than 25mm, KEY-ADJ. KEYANKA bridge, sockets and locknuts should be ordered as separate items. KEYANKA in concrete with joft screed rKin...

Open the catalog to page 4
Kee iBolt Brochure - 5

Periodic Inspection BS7883 requires that, wherever possible, all safety anchor devices are removable for periodic inspection. This is easily achieved by using our Knurled Inserts in conjunction with our Resin Capsules. We also offer PPE Warning Discs, which are required for compliance with EN 795. A M12 Female Threaded Knurled Inserts are available in lengths of 76mm, 102mm, 120mm, and 150mm to suit varying installation situations. N.B. 76mm sockets should ONLY be used in DENSE A concrete. B 16mm diameter resin B capsules should be used with M12 Female C Threaded Knurled inserts. C Threaded...

Open the catalog to page 5
Kee iBolt Brochure - 6

Cantilever Anchor Devices Cantilever Sockets for RINGANKA For Brickwork Max. Cantilever (mm) We also offer Cantilever Anchor Devices for use in dry lined walls or in conjunction with plasterboard, cladding etc. Where the distance from the face of the load bearing structure to the collar of the eyebolt does not exceed 25mm, a spacer sleeve may be placed under the eyebolt collar to provide the necessary support (Fig. A). Where the distance from the face of the load bearing structure to the collar of the eyebolt exceeds 25mm, special cantilever sockets are available. Where the distance to be...

Open the catalog to page 6

All KEE SAFETY catalogs and technical brochures

  1. Kee Lite

    2 Pages

  2. Kee Cover

    4 Pages

  3. KEE DOME

    2 Pages

  4. Kee i-bolt

    2 Pages

  5. KEE GATE

    20 Pages

  6. Pallet Gates

    28 Pages

  7. Kee Modules

    1 Pages

  8. Kee Anchor

    3 Pages

Archived catalogs