Engineered Life Line Systems
8Pages

The Safety Solution for Engineered Life Lines • CONFORMS TO EN 795:2012, CEN TS 16415:2013, ANSI Z359 & CSA Z259 AND PATENT PROTECTED BY GB 2389386 • FOR ROOF INSTALLATION AND HORIZONTAL OR OVERHEAD APPLICATIONS ON STRUCTURES • ALLOWS SPANS UP TO 12M AND 3 USERS • SUITABLE FOR USE ON MULTIPLE ROOF

Working at Height Legislation demands that any person working at height needs to be protected to prevent them from falling. Ideally working at height should be avoided altogether but in many instances it is unavoidable. When this is the case the preferred solution is to implement a collective protection system such as guardrail but sometimes this is not possible, perhaps when a building layout is inappropriate or where aesthetics may be compromised; consequently, a personal protection solution must be implemented. A wire based horizontal life line system is a flexible, cost effective option...

KeeLine® for Roofs KEELINE now incorporates a redesigned post and base plate for use on membrane roofs. The new design will allow easier and quicker installation but still utilises the same range of brackets as the options for tiled, standing seam and metal profile roofs. Upright Post for Membrane Roofs Upright Posts for Tiled Roofs Upright Post for Standing Seam Roofs Upright Posts for Profiled Sheet Roofs KeeLine® Brackets for both Roofs & Structures Intermediate Bracket One-piece bracket for intermediate supports Accomodates internal or external bends Accomodates internal or external bends

KeeLine Brackets for Structures Only Extremity Bracket Structural Corner KeeLine Universal Components Absorber Wire 8mm dia 7x7 IWRC Gr. 316 Stainless Steel. Available cut to length or 1000m reels. KeeLine® Traveller Tension Indicator Used at start of system (or both ends for systems over 150m). Indicates when system is correctly tensioned. Available Swaged or Swageless. Used to terminate system. Available Swaged or Swageless. Allows user to attach at any point on system. No moving parts. Passes corners and intermediates without needing to detach from the system. KeeLine Overhead Unique...

Kee Safety’s POSTANKA range of fabricated, hot dipped galvanised anchors are designed using a standard calculation program to the requirements of EN 795 Class A2 or OSHA’s 5000 lbs (22.2kN) requirement. Used where it is preferable to mount directly to a buildings structure, e.g. on traditional sloping roofs or onto concrete roof decks, for example on green roofs. POSTANKA anchors are available in standard sizes but are more typically designed to suit customer’s specific application. POSTANKA anchors are available in two styles. Type 3 Postanka TYPE 3 Designed to clamp around either suitable...

KeeLine® Overhead • Higher pre-tension than standard KEELINE systems reduces line sag and cable deflection • Supports multiple users • Durable electro-polished Gr.316 stainless steel • Meets the requirements of international standards. • Permanently attached, Gr.316 stainless steel, smooth running two wheeled traveller easily passes intermediate brackets • KEELINE in-line shock absorber limits end loads to structure • Suitable for single or multiple span systems • Spans of up to 24m in between supports • End and intermediate brackets are installed directly to suitable structures, including...

Benefits • Compliant with EN 795 2012, CEN TS 16415:2013, ANSI Z359 & CSA Z259 • Proven system meeting all current legislative requirements • Tested on multiple roof types • Safety assurance that the system is fully functional on all approved surfaces • Maximum span between posts of 12m • Minimises the number of posts and roof fixings required • Traveller can pass the whole length of the system without having to be detached at any point • The user is always connected to the system • Open style, low profile post designed to suit metal profile and standing seam roofs. • Posts designed to...

Kee Safety Ltd. Cradley Business Park Overend Road Cradley Heath B64 7DW United Kingdom Email: sales@keesafety.com www.keesafety.co.uk KEELINE is a registered trademark of Kee Safety Ltd. Whilst every effort has been made to ensure the accuracy of the information contained within this brochure Kee Safety Ltd cannot be held responsible for any errors or omissions. Kee Safety Ltd reserves the right to alter or withdraw products without prior notice. Kee Safety Ltd accepts no responsibility for any loss or damage arising from improper use of their products. ©2016 Kee Safety Ltd. All Rights...