Catalogs >
KEE SAFETY >
BeamClamp Suspension Fixing

BeamClamp Suspension Fixing
7Pages

Catalog excerpts

Suspension Fixings • UN IQ UE UNIV ERSAL DECK I NG FI XI NG - B B A T E S T E D • SF FL AN G E CLAMP - FM APPR OVE

•One fixing suits seven most popular decking profiles •Allows for manufacturing tolerances in the deck profile •Single piece construction •Separate fixing screw to ease final adjustment •M06, M08 & M10 threaded fixing holes •Requires no site power or skilled labour •Tested at the British Board of Agrement Uni-Wedge has been specifically designed as a single universal fixing suitable for the seven most popular deck profiles available in the UK. These decking profiles are nearly always present on steel constructed multi-storey buildings and Uni-Wedge provides a solution to fix building...

Open the catalog to page 2

Uni-Wedge Installation Steps 1. Select the correct position for the grub 2. Insert Uni-Wedge in to the re-entrant 3. Tighten the grub screw to secure the screw to suit the decking profile as shown channel of the deck. Ensure the point of the fixing. We recommend a tightening torque grub screw is not exposed at the top of the hole as this will stop Uni-Wedge fitting. 4. Once the grub screw is secured one of the M06, M08 or M10 threaded holes can be fixed to. This maybe threaded bar, eyebolts, J-bolts or any other threaded items used for suspending building services. We always recommend...

Open the catalog to page 3

•Only requires one tool for installation •Hot Dip Galvanised •Can accommodate clips/brackets •Extensive fixing range •Tested for Tensile and Lateral loading MATERIAL: Cast Steel to ASTM A27 : Grade 70 - 36 FINISH: Hot Dip Galvanised to BS : 1461 The BL Flange Clamp is a versatile clamp used for a wide variety of applications. It can be used with clips and brackets underneath the nut and washer side for fixing conduit or even pipe work. It can also be used for fixing down the lids of pressure vessels or clamping steel together without the need for drilling or welding. sheet below. The...

Open the catalog to page 4

• Allows a swing of 10° in all directions • Prevents the need to bend threaded bar • Provides pivotable element for adjustment The hemispherical washers (BU1) and cups (BV1) provide a pivotable action when used with threaded bar. They allow a 10 degree swing in all directions from vertical and when used in pairs can provide a locked connection as shown opposite. Typical applications would be connecting to a roof rafter where the threaded bar needs to be hanging perpendicular to the floor or for making a ball socket on the legs of air conditioning support frames to allow adjustability for...

Open the catalog to page 5

BL1 Flange Clamp with angle bracket connecting to a vertical pipe. BL1 Flange Clamp with the bolt replaced by threaded bar for Any style of bracket can be used underneath the nuts and washer for supporting strut and cable tray. The recessed part locates a top nut to allow the height to be adjusted and prevent the need for two spanners. SF Flange Clamp connecting to a strap hanger for supporting a A pair of hemispherical cups and washers used to connect a pipe run. The back hole allows the height of the threaded bar to be threaded bar to a roof rafter. Using a cup and washer at both sides...

Open the catalog to page 6

Cradley Business Park +44 (0) 1384 632 192 Overend Road Cradley Heath West Midlands B64 7DW Email: sales@keesafety.com United Kingdom web: www.keesafety.co.uk BEAMCLAMP is a registered trademark of Access Technologies Limited, a subsidiary of Kee Safety International Limited Whilst every effort has been made to ensure the accuracy of the information contained in this leaflet Access Technologies Limited cannot be held responsible for any errors or omissions. Access Technologies Limited reserve the right to alter or withdraw products without prior notice. Access Technologies Limited...

Open the catalog to page 7