KeDrive DMS2 Synchronous Motors
36Pages

KeDrive DMS2 Synchronous Motors

KeDrive DMS2 – Overview Introduction Synchronous Motors Synchronous Motors KeDrive DMS2-040 Overview Motor Lengths

The KeDrive DMS2 synchronous servomotors are suitable for almost all servo applications in automation. The high torque density permits a particularly compact design with maximum torque up to 1150 Nm. Everything from analogue encoder through to modern, digital safety encoder are available, depending on the requirements for precision and safety technology. With the high-resolution Hiperface DSL encoders safe high-performance applications can be realized with just one cable. The digital encoders are available both in single-turn and in multi-turn versions. The electronic nameplate with...

KeDrive DMS2 Synchronous Motors Overview // Maximum reliability // High overload capacity // Low torque ripple // One common cable for power supply and encoder signal Brief description The KEBA servomotors of the series DMS2 fulfill the highest standards of accuracy and of smooth running and are characterized particularly by a wide power spectrum and a wide speed range. The fine graduation of torque and speed over 9 flange sizes allows optimum motor dimensioning for each application. The high torque density makes the motor compact and dynamic. The moments of inertia are adapted especially...

Type Code DriveMotorSynchron Flange Size 58 = 58 mm Multiturn / singleturn M: multiturn S: singleturn 0: if Resolver Series Q: 8 Poles J: 10 Poles (standard for DMS2-190) I: 6 Poles (standard for DMS2-240) Other design options 000: standard (self cooled, M23/M40 connector, 400V supply voltage) A00: Forced air cooling 230V Continuous stand still torque e.g. 0005 = 0.5 Nm Brake B0: no brake B1: standard brake Shaft version G1: smooth shaft P2: shaft with keyway and key Feedback system 1: Hiperface SKM36/SKS36 (Number of sine/cosine periods per revolution: 128)** 3: Hiperface DSL capacitive...

KeDrive DMS2-040 Synchronous Motors Flange Dimension 40 mm Imax Arms *) With brake the moment of inertia is higher by 0.013 kgcm² **) Lengths refer to encoder option 3: Hiperface DSL EES37/EEM37 without brake (or B1: with brake); an overview of all lengths is on p. 26 ***) With brake approx. 0.1 kg more weight

KeDrive DMS2-058 Synchronous Motors Flange Dimension 58 mm PN W Imax Arms *) With brake the moment of inertia is higher by 0.12 kgcm² **) Lengths refer to encoder option 1, 3, 5 and B0: without brake (or B1: with brake); an overview of all lengths is on p. 26 ***) With brake approx. 0.5 kg more weight

KeDrive DMS2-070 Synchronous Motors Flange Dimension 70 mm PN kW Imax Arms *) With brake the moment of inertia is higher by 0.38 kgcm² **) Lengths refer to encoder option 1, 5 and B0: without brake (or B1: with brake); an overview of all lengths is on p. 26 ***) With brake approx. 0.6 kg more weight

KeDrive DMS2-091 Synchronous Motors Flange Dimension 91 mm PN kW Imax Arms *) With brake the moment of inertia is higher by 0.38 kgcm² **) Lengths refer to encoder option 1, 3, 5 and B0: without brake (or B1: with brake); an overview of all lengths is on p. 26 ***) With brake approx. 0.6 kg more weight

KeDrive DMS2-100 Synchronous Motors Flange Dimension 100 mm PN kW Imax Arms *) With brake the moment of inertia is higher by 0.54 kgcm² **) Lengths refer to encoder option 1, 3, 5 and B0: without brake (or B1: with brake); an overview of all lengths is on p. 26 ***) With brake approx. 0.6 kg more weight

KeDrive DMS2-142 Synchronous Motors Flange Dimension 142 mm (4.5 Nm – 26 Nm) PN kW Imax Arms *) With brake the moment of inertia is higher by 1.66 kgcm² **) Lengths refer to encoder option 1, 3, 5 and B0: without brake (or B1: with brake); an overview of all lengths is on p. 26 ***) With brake approx. 2.0 kg more weight

KeDrive DMS2-142 Synchronous Motors Flange Dimension 142 mm (29 Nm – 38 Nm) PN kW Imax Arms The following motors have an M40 power connector, as shown in the drawing below. DMS2-142-0320-45 *) With brake the moment of inertia is higher by 9.5 kgcm² **) Lengths refer to encoder option 1, 3, 5 and B0: without brake (or B1: with brake); an overview of all lengths is on p. 26 ***) With brake approx. 2.5 kg more weight

KeDrive DMS2-190 Synchronous Motors Flange Dimension 190 mm (20-42 Nm) PN kW Imax Arms *) With brake the moment of inertia is higher by 32 kgcm² **) Lengths refer to encoder option 1, 3, 5 and B0: without brake (or B1: with brake); an overview of all lengths is on p. 26 ***) With brake approx. 5.0 kg more weight

KeDrive DMS2-190 Synchronous Motors Flange Dimension 190 mm (56-80 Nm) Imax Arms The following motors have an M40 power connector, as shown in the drawing below. DMS2-190-0680-20 *) With brake the moment of inertia is higher by 32 kgcm² **) Lengths refer to encoder option 1, 3, 5 and B0: without brake (or B1: with brake); an overview of all lengths is on p. 26 ***) With brake approx. 5.0 kg more weight

KeDrive DMS2-240 Synchronous Motors Flange Dimension 240 mm (42 Nm – 73 Nm) PN kW Imax Arms *) With brake the moment of inertia is higher by 52.87 kgcm² **) Lengths refer to options 1: Hiperface SKM36/SKS36 and B0: without brake (or B1: with brake); an overview of all lengths is on p. 26 ***) With brake approx. 7.0 kg more weight ****) The following motors have an M40 power connector, as shown in the drawing below

KeDrive DMS2-240 Synchronous Motors Flange Dimension 240 mm (81 Nm – 120 Nm) PN kW Imax Arms *) With brake the moment of inertia is higher by 52.87 kgcm² **) Lengths refer to options 1: Hiperface SKM36/SKS36 and B0: without brake (or B1: with brake); an overview of all lengths is on p. 26 ***) With brake approx. 7.0 kg more weight

KeDrive DMS2-270 Synchronous Motors Flange Dimension 270 mm PN kW Imax Arms *) With brake the moment of inertia is higher by 52.87 kgcm² **) Lengths refer to options 1: Hiperface SKM36/SKS36 and B0: without brake (or B1: with brake); an overview of all lengths is on p. 26 ***) With brake approx. 7.0 kg more weight