KeConnect I/O modules
44Pages

Product features • Up to 16 digital inputs • 2 digital inputs with interrupt • Electronic parameter chip • Configurable input filter Short description The digital input module of the DI 2xx/x series enables the connection of 8 (DI 240/B) or 16 (DI 260/A) digital inputs. 24 V DC control signals are captured by the digital inputs and transmitted galvanically isolated to the higher-level automation device. In addition, two digital inputs can be used as interrupt inputs. These modules are attached directly to a CPU module or can be operated with all KEBA controls by means of bus couplers.

KeConnect DO 242/B, DO 272/A Digital output modules Product features • 8 or 14 digital outputs • Short-circuit detection and diagnosis • Permanently short-circuit proof • Current load capacity 2 A at 50 % simultaneity • Fast shutdown function for inductive loads • Electronic parameter chip Short description Digital output modules DO 242/B and DO 272/A enable the connection of up to 14 digital outputs. The digital outputs switch the 24 V DC control signals of a central module galvanically isolated from the connected actuators and are designed for a load of up to 2 A at 50 % simultaneity. The...

Product features • Up to 8 digital inputs • 8 digital 2 A outputs • 2 digital inputs with interrupt • Short-circuit detection • Permanently short-circuit proof • Electronic rating plate Short description The DM 27x/A series is a digital input/output module of the KeConnect C2 product line and enables the connection of 6 or 8 digital inputs and 8 digital outputs. 24 V DC control signals are captured by the digital inputs and transmitted galvanically isolated to the higher-level automation device. In addition, two of the digital inputs can be used as interrupt inputs. The digital outputs...

Product features • 4 analog voltage inputs usable as differential inputs or as single-ended inputs • Resolution 14 bit • Sensor failure detection • Electronic parameter chip Analog input module KeConnect AI 240/A features four analog voltage inputs that process differential or ratiometric input signals in the range from ±10 V or 0-10 V with a resolution of 14 bit. A sensor failure, should it occur, is reported to the higher-level central module and can be evaluated in the application. This module is attached directly to a CPU module or can be operated with all KEBA controls by means of a...

KeConnect AO 240/A Analog output modules Product features • 4 analog voltage outputs • Resolution 12 bit • Electronic parameter chip Short description KeConnect AO 240/A is an analog voltage output module. The outputs produce signals in the range of ±10 V with a resolution of 12 bit. This module is attached directly to a CPU module or can be operated with all KEBA controls by means of a bus coupler.

Product features • 4 analog inputs • 4 analog outputs • Signal form: Voltage or current • Sensor failure detection • Resolution of the outputs up to 14 bit • Electronic parameter chip Short description The AM 28x/x series is a hybrid module and enables the connection of four analog inputs and four analog outputs with voltage or current signals. The analog inputs of the AM 28x/A process both single-ended as well as differential voltage signals. The AM 280/B is equipped with current inputs and outputs. A sensor failure, should it occur, is reported to the higher-level CPU module and can be...

Product features • Cost- and space-optimized compact module, especially well suited for plastic machines • Supports the “fast control” concept • Functions for changeover point recognition • Connection via high-performance EtherCAT connection • Direct expandability by means of KeConnect C2 modules • Extensive diagnostic options Short description The IM 270/W is a cost- and space-saving compact module. It combines the typical I/O design for plastic injection molding machines in one module and offers functions for changeover point detection. In addition to application in the plastics sector,...

Function for the direct connection of K-bus modules

KeConnect TM 2x0/A, TM225/A Temperature measurement modules Product features • Thermoelement type J, K, L (TM 220/A, TM 240/A) • For PT100 sensors (TM 225/A) • Internal and external cold junction compensation • High measurement precision • Sensor failure detection • Electronic parameter chip Short description The TM 2xx/A series consists of temperature measurement modules that can be directly attached to CPU modules and operated with all product lines of the KEBA control system by means of bus couplers. TM 220/A, TM 240/A Analog input modules TM 220/A and TM 240/A enable the direct...

Product features • 2 incremental encoder inputs with 12- or 32-bit resolution • 2 latch inputs as sink or source input • Electronic parameter chip Short description The MM 240/A is an incremental encoder of the KeConnect C2 product line. This module is attached directly to a CPU module or can be operated with all KEBA controls by means of bus couplers. MM 240/A features • Position measurement: Forward/backward counter of increments by means of tracks A and B • Single, double, quadruple evaluation • 32-bit resolution • Speed measurement through sampling with internal time basis • Rotary...

KeConnect SM 2x0/A Serial communication modules Product features • Serial interface modules (RS 232-C, RS 422/485-A, Current Loop) • Full-duplex operation • SSI interface module • High interference immunity • Electronic parameter chip Short description The SM 2x0/A series consists of serial and SSI interface modules that can be attached directly to a CPU module or operated with all KEBA control systems by means of bus couplers. SM 210/A and SM 230/A are serial interface modules and enable the connection of two RS 232-C or RS 422/485-A serial interfaces. The two communication channels...