COMBIVERT G6 FREQUENCY INVERTER 0.75 kW ... 30 kW EN

CONTENTS PAGE Integrated flexibility with safety 5 Technical features - Control unit 6 Technical features - Power unit 7 Versatile solutions for machines and plants 10 COMBIVIS 6 - The tool for all tasks 12 Integrated development environment 13

SYSTEM OVERVIEW Automation with Drive stands for the optimally selected combination of control and automation with the drive package as the key to successful machine concepts. Let yourself be inspired by the versatility and performance of the COMBIVERT G6 frequency converters on the following pages and find solutions that reliably meet your requirements. IIoT IIoT & Edge-Platform CONTROL SOFTWARE Remote Control CLOUD ROUTER CONNECT ROUTER RESET RUN / STOP COM Rx REMOTE CONNECT POWER REMOTE CONNECT COM Tx Control Software CONTROL HARDWARE Embedded Control Input AC 3PH 50/60 Hz 400V XXXXXX Output:...

COMBIVERT G6 – THE ADVANTAGES AT A GLANCE The COMBIVERT G6 series has established itself as a reliable and versatile solution for controlled three-phase drives. Developed to meet a wide range of requirements in machine and plant engineering, it impresses with a well thought-out concept that supports both current technologies and future developments. Thanks to powerful 32-bit microcontrollers and the continuous development of proven KEB technology, the G6 series offers a high degree of flexibility and functionality. VERSATILE APPLICATION OPTIONS The basic version in U/f operation with the proven...

INTEGRATED FLEXIBILITY WITH SAFETY In line with the current requirements of the Machinery Directive, COMBIVERT G6 offers the integrated 2-channel STO safety function according to Category 3 - EN ISO 13849-1 Performance Level ‘e’ / IEC EN 62061, SIL 3. STO SafeSicherer Stop 1 Stop 1 Safe Speed Monitor (f = 0 Hz) When connected to an external safety time relay, the SS1 function can also be covered by braking the drive within a set time and setting it to STO (stop category 1 from EN 60204-1). COMBIVERT G6 – FILTER TECHNOLOGY ON BOARD All device sizes are equipped with an integrated EMC filter ready...

• 2 analog outputs (0 V ... ±10 V) (not with EtherCAT) • STO function, 2-channel according to Category 3 in accordance with EN ISO 13849-1 Performance Level 'e', IEC EN 62061, SIL3 • Devices with EtherCAT control optionally fulfil the TOV-certified SSM function with level 0 Hz • Internal and separate 24 V DC supply • RS 232/485 interface, open protocol KEB DIN 66019-II • Stopping drives without braking resistor • Safe operation of brakes and sliding anchor motors • Process controller for internal and external control variables • For use in series machines, devices can be preset ex works and delivered...

TECHNICAL DATA – POWER UNIT POWER UNIT 1-phase 200 V AC ... 240 V AC, • 3-phase 380 V AC ... 480 V AC, +10/-20 %, 50/60 Hz and DC input • EMC according to class C1 and C2 with integrated filter • Internal braking transistor EMC INCLUDED Internal filter with new core materials, designed • in accordance with EN 61800-3 for environments C1 and C2, with motor cables up to 100 m - C2 / 50 m - C1 • with minimal leakage currents of the filter part to earth and separate mains and motor connection sides FULLY DIMENSIONED • With high overload characteristic for acceleration and deceleration, preferably...

COMBIVERT G6 Housing E - Flat Rear COMBIVERT G6 is available in four physical sizes covering a power range from 0.75 kW to 30 kW and is designed for installation in control cabinets or machine bases. Devices with a flat rear and push-through mounting are further variations for optimising heat transfer. Mounting Weight Cooling Ventilated convection Flat Rear* External heat/push-through

TECHNICAL DATA Output voltage Output frequency Max. motor cable length (shielded EN 61800-3) *for 400 Vsizes with a rated voltage of480 V: I = 0.86xrated output current

FOOD PRODUCTION • High starting torque • Precise torque during operation • Protective coating • Fast setpoint processing with ±10 V • Controlled positioning compensates dead times • Long motor cables up to 100 m • Robust mechanics • High dynamics during acceleration • Internal braking transistor • PID controllers for process control • High starting torque • Constant speed under load changes • Suitable for modern three-phase motors and conventional elevator motors • Operation of spindle drives • Conveyor systems, stacker • Tool adjustment • PID controllers for process control • Protective coating...

FLEXIBILITY AND PERFORMANCE FOR DEMANDING DRIVE SOLUTIONS The COMBIVERT G6 is the ideal solution for modern drive technology in mechanical engineering. Its modular architecture allows for seamless integration into a wide range of applications, including special fieldbus protocols, special motors and extended software functions. High performance, adaptability and integrated safety functions ensure maximum efficiency and system compatibility. YOUR ADVANTAGES AT A GLANCE • • • • Modularity: Consistent device concept across all performance ranges – ideal for scalable systems Flexibility: Adaptable...

Commissioning software for parameterisation, diagnostics and project management • Free and easy-to-use software for commissioning, management and analysis • Direct access to device documentation • 16-channel oscilloscope for comprehensive analyses, 4 channels of which can be displayed in the drive's control grid • Online and offline parameter list comparison/Quick Compare Mode • Parameterisation of safety parameters and functions COMBIVIS studio 6 The intelligent automation suite from KEB combines an assistant-guided component selection, fieldbus configuration, drive parameterisation, IEC 61131-3...

COMMISSIONING ASSISTANT • Complete user guidance through the commissioning process • KEB Motor database, freely expandable • Anti cogging • Fieldbus diagnostic and optimisation • Sine filter wizard • Servo pump wizard • IEC 61131-3 Applications development • COMBIVIS studio HMI integration • Start-up and diagnosis assistant • Document database