1. Catalogs
  2. KDS
  3. Syringe Pump

Syringe Pump

Syringe Pump

Syringe Pump

Product catalog summary
Overview: The document introduces the KDS 310 Plus, a nanoliter syringe pump designed for laboratory use, offering precise fluid delivery with a range of syringes from 0.5 µl to 250 µl. It is not FDA-approved for clinical use.
Specifications: The KDS 310 Plus features a microprocessor-controlled stepper motor with a force of 2 lbs, capable of delivering flow rates from 0.001 µl/min to 363.7 µl/min. It operates on a voltage range of 110-130V or 220-260V, with dimensions of 9x6x3 inches for the controller and 7x1.7x2 inches for the injector.
Features: Key features include quick setup, a remote injector up to 6 feet away, a power failure mode, and optional footswitch interface for hands-free operation. It supports both infuse and withdraw modes, with a typical accuracy of 1% or better.
Applications: The pump is suitable for continuous fluid delivery, small dose dispensing, stereotaxic injections, and microfluidic dispensing, serving markets such as pharmaceutical, biotech, chemical, and neuroscience.
Flow Rates: The document provides detailed flow rate specifications for various syringe sizes, ranging from 0.5 µl to 250 µl, with corresponding Hamilton ID measurements.
Options: Available options include a footswitch interface and additional injectors.
Contact Information: KD Scientific, located at 84 October Hill Road, Holliston, Massachusetts, provides contact details for further inquiries.
See more

Catalog excerpts

Syringe Pump-2

KDS 310 Plus InjectorRounded or flat plunger heads.Adjustable syringe clamp. Removableguide rod for easy adjustments. KDS 310 Plus Mounted on a Stereotaxic Frame ModelModel 310 Plus > KDS 310 Plus with Optional Footswitch Syringe Size0.5Ֆ250 microliterElectrical RatingUS model 115V~, 0.125A CE model 230V~, 0.05A Fuse5x20 mm, 250V~ slow blow 0.1A @115 Volt ; 0.05A @ 230VoltVoltage Operating RangeModel 110-130V~, 50/60Hz Model 220-260 V~,50/60HzDrive MechanismMicroprocessor controlled stepper motor (1⁄2 microstep), leadscrew Force2 lbs (minimum) Pusher Advance Per Half Step1.58 microns Minimum...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.